Discussion Locked

DHCP Server

0 helpful
6 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
My DHCP server not releasing ip address after the lease period.

6 replies

by msklizmantas

how do you know it? ;) what is your problem exactly, ip pool is 100% used or workstations get the same ip address everytime they try to renew ip?

by 93961

Normally when a lease expires the DHCP Client will ask for new lease and if, as in the previous answer, the IP Address table is not used up 100% and if the same previous IP Address can still be alloted or there are no conflicts, the same old IP Address is alloted/leased

by 93961

Normally when a lease expires the DHCP Client will ask for new lease and if, as in the previous answer, the IP Address table is not used up 100% and if the same previous IP Address can still be alloted or there are no conflicts, the same old IP Address is alloted/leased

by devi.choudhury

Thanks for the comment but my ques is after the lease duration i have given 8 hrs it is not relasing other people in the shift after connecting there laptop not getting ip.

by kinetechs

What is the lease duration? A Windows client will always ask to renew its DHCP lease at set intervals (i.e. 1/2, 3/4, 7/8 of lease). For example, a client with an 8 hour lease will attempt to renew when 4 hours (1/2 of lease period) have passed. If successful, it will have the lease for another full 8 hours...it will renew again when 4 hours (1/2 of the current lease period) have passed. When the client renews, it get a full lease again. So depending on your server's lease period, your clients may be renewing throughout the day, keeping the IPs tied up.

Cheers,
Sean

This discussion is closed to new replies.