Windows Forum

Ask something
Discussion Locked

Dial Up Server

0 helpful
4 replies

by gazza-sa

Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I have a P2P network consisting of 3 local machines, on one of the machines i want to set it up as a dial up server.
I have dial up server enabled and allow access from remote selected, I have TCP/IP & netbeui protocols running.
My problem is thatwhen i dial in from the remote machine i can establish a connection but i am unable to see the server in windows.
I can ping the server in a dos box but i cannot see it with net view
What am i doing wrong ????

4 replies

by fenaikh

Hi
pls do this to access it.
start->find->computer- then type the name of the computer when you find it click it and a ssiagn a map drive to the drive you want.
i'm do this now. it work form i hope it work for you.
good luck
Mohamed

by fenaikh

hi
continued ..
after you made a map to any drive then
start->run- net view \\computername
then you will see teh resources shared.
by the way..
make sure that both have eanble file and print sharing from microsoft
network to map for both.
make sure that they have a commn protocol ipxspx or NetBEUI.

pls read these article to about this which may help you.

Article ID: Q139710
How to Enable Dial-Up Networking Server Capabilities
http://support.microsoft.com/support/kb/articles/Q139/7/10.asp

Article ID: Q145843
How to Connect to a Remote Server Using Dial-Up Networking
http://support.microsoft.com/support/kb/articles/Q145/8/43.asp

Good luck.

Mohamed

This discussion is closed to new replies.