Discussion Locked

Disable 98SE splash screen from within

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I wish to disable the spshscreen at boot so as to speed up boot-where is file and or ID-waiting in anticipation - thanks

5 replies

by jdfcomputer

Here are the procedures step by step:

STEP1: Reboot your Win95/98 system. When you see "Starting Windows 95..." on the screen, hit the F8 key. This will cause the Boot Menu to pop up. Select "Command Prompt Only" and hit Enter. You will soon end up at the C>prompt.
STEP2: Modify your MSDOS.SYS file. It is a read only, hidden, system file. To remove those attributes type: attrib -r -h -s msdos.sys

STEP3: Make a backup copy of your MSDOS.SYS file by typing: copy msdos.sys msdos.old
STEP4: Edit MSDOS.SYS. Now type: edit msdos.sys You will see a section labeled [Options]. Modify the [Options] section and add the lines you do not have as follows (The order does not matter):
BootGUI=0 (This line alone will cause Win95 to boot to DOS prompt only) (Or try these next three or four lines):
BootMenu=1 (This will cause boot menu to always appear on bootup)
BootMenuDelay= 10 (Default is 30 seconds)
BootMenuDefault= Whatever number choice on the Boot Menu you want.
BootMulti= 1 (Add this line if you installed Win 95 over an older DOS (-it will allow you to boot up with the older DOS. It adds an additional boot menu choice)
Logo=0 or 1 (Turns the splash graphic off or on)
Network= 0 or 1 (Again, it dependson your system)
AutoScan=0 OSR2 USERS ONLY-add this command here to stop your machine from running Scandisk on a reboot after a lockup or power outage.

STEP5: Reboot and test it. If it's what you want, put the attributes back on MSDOS.SYS by typing: attrib +r +s +h msdos.sys

This discussion is closed to new replies.