Question Locked

disk management error

0 helpful
10 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
Hello. I recently bought a hard drive enclosure case to make my old hard drive become a portable hard drive. After everything was installed, I connected it to my new laptop, but I cannot find the drive appear on "my computer" window. Then, I went to the disk management to partition for my portable hard drive. In the disk management window, there are 2 icons named IBM_PRELOAD(C:)and under that is IBM_SERVICE, the IBM_PRELOAD(C:)has the layout,type,file system and status information such as NTFS and volume is 88.8 G. On the other hand, IBM_SERVICE does not suppose to have any information as mentioned above. Well, I mistakenly right-click the IBM_SERVICE and it pops up an option named "format it now?". Then I formatted it and the problem comes up. The volume of this IBM_SERVICE became 4.28 G and the file type is FAT32. In other words, my C: drive's volume became 93:08 G. After that, I have done allocating my portable hard drive,but I cannot see its every single information and I cannot open it anymore because the system requires me to format it all the time. I know I have made a stupid mistake such as format that IBM_SERVICE. I beg somebody to tell me any effective way to solve this problem. I have tried to use Data management software to recover my C: drive, but the problem is still on.

10 replies

by older mycroft

This means if you ever have a need to return your laptop to factory settings, you can't.

All you've been looking at is your internal NTFS C: drive plus the Recovery Partition which would've been FAT32 format. I fear that your Recovery Partition is now gone forever, I hope you have Recovery CD Discs also.

by hippo007003

Hi there. Firstly, thank you very much for giving some advices. I have 2 real questions right now. is there any other way to solve this problem instead of sending my machine back to the builder. I bought my laptop from Future shop and all of the software are pre-installed before I got it. In other words,I don't have those software discs, so don't even think about that recovery disc. If the retailer has a PC repair department, I may take it to them. Secondly, my computer is still working fine,but just cannot read my portable hard drive. Can I plug my portable hard drive to another computer to get authorized, then I may use it in my laptop? Thanks!

by rob miners

What do you get in Disk Management by right clicking on the Partition IBM_PRELOAD. Can you allocate another drive letter. Is it giving you any options other than to format.

by hippo007003

If I right-click my IBM_PRELOAD, there are "open,explore and change drive letter and paths". I can still to allocate another drive such as drive "F", which is my portable hard drive, but the situation is I cannot open my "F"drive, it doesn't give me another option instead of giving me only a format.

by rob miners

{1}

Try rebooting the computer without any USB devices attached. Then plug in the USB drive, right click on My Computer, select manage, and then click ?Disk Management.? If the drive is not present in the Disk Management window or if you are not able to access it, then the drive may have failed. In this window you should see all of your connected physical drives, their format, if they are healthy, and the drive letter.

Change the drive letter of the drive. Right-click on the drive in the list, and from the resulting menu select "Change Drive Letters and Paths"

Click on Change so you can change the drive letter. Click Change. Select a new drive letter from the drop down list, preferably the one that is not normally used for this drive.

Click Yes on the confirmation screen and you are done.

{2}

Write down all fixed Disk and CD/DVD drive letters so as not to delete them. DO NOT delete any of the fixed hard disk drives or CD/DVD optical drives registry values.

1. Login with Administrative privileges.

2. Disconnect all USB or FireWire storage devices.

3. Open Registry Editor by typing regedt32 in the Run box and navigate to the following registry key: HKEY_LOCAL_MACHINE\SYSTEM\MountedDevices

4. Under HKEY_LOCAL_MACHINE\SYSTEM\MountedDevices there will be registry keys with the name that resembles the format of \DosDevice\X: where X can be any alphabet letter which corresponding to your physical system drive letter.

5. Delete all possible USB drives, FireWire drives and external drives which have a drive letter.

DO NOT delete any of the fixed Hard Disk Drives or CD/DVD optical drives registry values.

Exclude \DosDevice\A: which normally reserved for floppy disk drives.

{3}

Click Start and in the Run box type in cmd and press Enter.

At the command prompt type in chkdsk U:/r 'the drive letter that you just added:' EG: U: and press enter.

If it finds any discrepancies it should fix them.

Tip: The cause of unpredictable behavior in a USB drive is often found to be the incorrect removal of a previously connected USB device. When removing USB devices right click on the ?Safely Remove Hardware? icon in the menu bar tray. This is usually found in the bottom right hand corner of the monitor. Once you have clicked on the icon, a menu with a single selection should appear. Click again on that selection to see the ?Safely Remove Hardware? window. Select the correct USB device and click the ?Stop.? When you receive the message that it is safe to remove the device, unplug the USB device from the computer.

by hippo007003

Thank you very much for providing those methods,but the command says the USB drive file type is RAW, the command does not support this type of file. There is a new situation. I have plug my USB hard drive to another laptop. This laptop automatically found my USB drive and it pops up a drive "D",but I still cannot open it because the system still require to format it. I think it might be my USB drive's problem;however, it seems like weird. The function of this USB hard drive should be the same as a USB flash memory. Why the computer cannot recognize it? Any physically problem?

by rob miners

Have you got access to a powerd USB Hub.

Does the Notebook that you removed the drive from still function.

by hippo007003

Hi my friend. There are something new now. I have uninstalled that old hard drive from the USB kit and I installed another old hard drive into it. This time, everything is going perfectly. Then the problem is like my 1st old hard drive. The system confirm it's like a RAW type and neither NTFS nor FAT32. How do I recover it?

This discussion is closed to new replies.