Discussion Locked

Display Adaptor? - AGP ATI 3d 128 VR

0 helpful
11 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
Recently formatted H/D and re-installed W98se. Now unable to use more than 16 colours or increase resolution. Motherboard is MS5191 and Display Adaptor assumed to be AGP ATI 3d 128 VR (Rage?). Have tried, but cannot locate correct driver. Can anyoneadvise, please?

11 replies

by sgt_shultz

why do you think the card is an AGP ATI 3d 128 VR? double-check by inspecting the card for stickers/names/part numbers/BIOS numbers, chipset numbers. if you are sure it is an ATI card, can you locate the '102' number? it will be a long number beginning with P/N 102 on a white sticker on the card.
here is a link to the www.ati.com website page about identifying your particular card.
http://mirror.ati.com/support/identify/cardver.html
armed with the data from inspecting your card, you could also try www.driversguide.com
it does sound like a driver issue.

by rob1257

Apologies for not stating that the graphics card is integrated into the motherboard along with the parallel & serial ports. The only visible markings on the motherboard near the adaptor are JVGA1 and below that GM1. The manufacturers' websites for the PC & motherboard displayed the details of the ATI card, and I assumed that is what is installed.

by georgevlob

Pull out the graphics card. Look on the back of the card and you should see a sticker that has the model or part number of the card. Just to the ATI's web site and search on that part number.

by rob1257

Sorry for not stating the original graphics card is integrated and not a PCI version. I've installed a separate card temporarily to progress further. Thank you for your interest.

by rob1257

Sorry for not stating the original graphics card is integrated and not a PCI version. I've installed a separate card temporarily to progress further. Thank you for your interest.

by paulp

If this video adapter is part of the original PC equipment, the PC manufacturer may be able to supply you with an appropriate video driver.

by rob1257

Sorry for not stating the original graphics card is integrated and not a PCI version. I've installed a separate card temporarily to progress further. Thank you for your interest.

by thechas

Since this was a clean re-install of Windows 98, you need to install a couple of other drivers before the video card can be detected, and installed properly.

First, you need the AGP mini-port driver for the motherboard.

Next, you need to install DirectX (from Microsoft).
Your choice of version 7, 8 or 9.
If you check ATI's driver installation instructions, you will find a requirement to install at least "X" version of DirectX prior to installing the video driver.

Then, you should be able to install the ATI driver.

Note: ATI has 2 different versions of many drivers depending on whether the card was built by ATI, or by an ATI partner.
Make sure you have the correct driver.

Chas

by rob1257

Sorry for not stating the original graphics card is integrated and not a PCI version. I've installed a separate card temporarily to progress further. Thank you for your interest.

This discussion is closed to new replies.