Windows Forum

Ask something
Question Locked

Display problem

0 helpful
5 replies

by thomas.kaiba 1 view

Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I have a notebook-hp compaq nx6110 that ha a display problem i.e sometimes it is clear while other times it is faint(this happens mostly when starting up the machine). if i need to boot it and get a clear-common window-i have to try several times without plugging in the power adapter else it will display faintly.
i have tried flashing the bios, updating all drivers-display drivers included- but to no success.
could you be of help?
thanks

5 replies

by older mycroft

Try taking the battery pack out, clean the contacts just with a dry lint-free cloth, both on the battery and in the laptop recess, then put the battery back in.

I've seen your problem occur occasionally because of dust in between the battery contacts so it's worth a try.

by dhirajsinh

the problem u faced is due to the cable in the hinges of the lcd. very simple but hp wl charge u 500$ for the same

by thomas.kaiba

Have come to associate it with the O.S installed.this is because i did install Win XP on a Toshiba PIII laptop and am getting the same problem. or what is your suggestion.

by dragon2000gh

I don't also know how to sort this out. I need to restart my laptop sometimes up to 50 times to get clear first HP starting image in the first 5-10 seconds and then windows loads normally. If this wasn't successful then I would get this starting image fainted and I need to turn off and again on until I get clear starting image.
When this problem started it took me just few times until I got windows started but now I can even struggle for 1 hour to get it going up and then I can use it until I switch it off.

This discussion is closed to new replies.