Windows Forum

Ask something
Question Locked

display problem

0 helpful
3 replies

by limsonlouise

Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
i m using P4 system , when ever i m switching on my system ,when even the windows mode starts , display will become blank (means no display ), i have formated my system and reinstalled OS, but even in insatlltion mode, in windows mode , there isno display

3 replies

by toivo talikka

It sounds as if you have a faulty graphics card or CPU. A bit more information about the configuration would help in giving advice how to troubleshoot the issue.

If you have access to another PC from which you can borrow the video card temporarily, you can find out if it is the card. If the problem still occurs with a video card which is working in another PC, you have rounded up the CPU and the motherboard as the usual suspects.

by kirushna606

Just take the CMOS battery out side for a sec and put it back into the slot. Now you should be able to start your PC.
If this doesnt work maybe the CMOS battery has looooooong life so detach it for half an hour then try replugging it.
Hope this helps.

MICROSOFT WINDOWS XP
Use genuine version only
IF a 47KB dos file is missing(NTDETECT.COM)
the whole SYSTEM WONT BOOT!

This discussion is closed to new replies.