Question Locked

DMI configuration

0 helpful
3 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
Hello, does anybody know how to readout the DMI configuration in DOS mode (without starting Windows at all)?

3 replies

by vinitogupta

Use the command line DMI236.EXE /g /n /s[m|p|v|s] string |/c[m|v|s|a] string| /b[m|p|v|s] to save or update the DMI information.
The parameters to add information are listed below:
/g
Save Manufacturer, Product Name, Version, Serial Number and UUID in Type 1. and Manufacturer, Product, Version and Serial Number in Type 2, to file UPDATE.BIN

/n
Write data from UPDATE.BIN (made from using /g parameter) to DMI

/ss "String"
system serial number string

/sm "String"
system manufacturer name string

/sp "String"
system product identification string

/sv "String"
system version string

/bs "String"
mainboard serial number string

/bm "String"
mainboard manufacturer name string

/bp "String"
mainboard product identification string

/bv "String"
mainboard version string

/cs "String"
chassis serial number string

/cm "String"
chassis manufacturer name string

/ca "String"
chassis asset tag string

/cv "String"
chassis version string

Here is the simple example for that:
DMI236 /ca "abc1234", abc1234 is your chassis asset tag string.

DMI236 /ss "123456", 123456 is your system serial number.

Thanks

by richard.eisenhauer

Hi, I tested the tool but I always get the following message when I enter dmi236 /p or dmi236 /g

Error Number = 30000081
It is PnP Function error !
Function Number = 0
Command Number = 0
Error happan in subroutine #0
Error Description :
PnP functions return code : 0x81, Unknow, or invalid, function number passed.

Do you have an idea? Or is it just useful for a special BIOS manufacturer? I use a phoenix BIOS.

This discussion is closed to new replies.