Question Locked

Dual-boot Vista and Windows 2k3 Server

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
Is it possible to dual-boot between Vista and Windows 2003 Server with Vista being the preinstalled OS? I have added a second hard drive and would like to install 2003 server there. This is for certification training.

5 replies

by dharvey

You should put Vista on last as 2k3 dosent know anything about Vista.

Normaly for dual booting you would install the oldest operating system first, then move the next in line, in your case that would 2k3 first then vista

by conradbritton

No you will need to first install the windows 2k3 and the do a fresh (New) install of Vista.
Then the Vista boot loader will be able to handle booting of both Operating Systems.

by test1

Original working configuration

Partition 1 Partition 2 Partition 3 Partition 4
Primary Primary Primary Logical
Recovery XP_Home S2003 Data
Fat32 NTFS NTFS Fat32

Boot Magic was installed on Partition 1

Configured such that if booting to XP home Drive C:
then Partition 3 would be hidden.

else

if booting to S2003 Drive C:
then Partition 1 & 2 would be hidden.

Default boot drive should be XP_Home

Procedure

Back up Partitions 1,2 & 3 using Ghost 9 to individual image files on Data drive.

Then just to be safe copy those back up files to another computer or an external hard drive.

Boot from windows Vista DVD

use advanced options to delete XP_Home Partition

create new partition 2 NTFS

format, assign drive letter C: to partition 2 if possible.

do clean install

install Vista to Partition 2

At this point the computer will only boot to vista and partition S2003 should be hidden.

Now, use ghost 9 recover CD to restore partition 1, make sure box to recover MBR is checked.

Now, when booting you should be given a choice by boot magic on which OS to start.

Thus far, I have not been able to change the default setting.

Best

John Or

by drchanixx

i did that with my pc. i have 2 physical drives. the first primary drive is for my vista while the second primary drive is for my 2003. just simple. install the vista in you first drive then install 2003 in your second drive. if you want vista to start first, during boot go to cmos setup and select your first primary drive as yout first boot. and if you want to make 2003 to start first, during boot go to cmos setup and select your secondary primary drive as your first boot.
i hope this helps.

This discussion is closed to new replies.