Discussion Locked

Dual Networking

0 helpful
11 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
The computers at my company are networked using a Novell system administered by a corporate headquarters. The machines are either running NT 4.0 Workstation or Windows 95. I want to build a small seperate peer network between a few of the computers.To do this I am planning to install a second NIC into the applicable computers and running separate cable. I do have Admin access to NT machines. Is this possible? Windows NT does not allow me to select a seperate computer and network name for each installed adapter on the computer. Do I have to name each network similarly?

11 replies

by flan

you don't have to install another nic all you have to do is install tcp/ip and give yourself a private netowrk address 192.168.xxx.xxx and that's it.

by dksj

So I can have multiple TCP/IP addresses associated with a single NT adapter?

by magetower

In addition to previous answer. NT Wkst does not support multiple NICs like a server does. Everytime I've run across a workstation with multiple NICs it has always been 'confused' until the extra NIC was removed.

by dksj

Actually I need to maintain seperate physical networks because the application I plan to use on the local network would slow the Novell network considerably. The application is a Siemens-Moore hmi and updates virtually continously in real time. I dont want to have to have seperate computers for each network.

by cstringer

In addition to the previous answers you may also consider running NetBEUI on the Windows machines and plugging them into a hub linked to a connection to the Novell network, this may give you a little more security because it's non-routable like TCP/IP and proprietary to Windows boxes.

Just a thought!

by nettek

Whenever you install two NICs on one machine, you have essentially created a router. While NT server has this capability, Win 9x and NT Workstation do not.

Besides, you essentially already have everything in place for a peer to peer: the nics, cables, and hubs that make up your corportate LAN. A peer to peer is simply PCs sharing resources from each other and not a server. Simply create the shares on the PCs and assign security to them. Now you have a peer to peer.

by Former member

You cannot AUTHENTICATE to two seperate networks on one workstation at the same time.

But since you're using NetWare, use the workgroups to create a local workgroup by putting every workstation in the same workgroup and adding file and print sharing. You may also then want to add the netbeui protocol if it is a local subnet. This would be the perferred method...

This discussion is closed to new replies.