9 replies
by k.a.boatman Accepted solution
by older mycroft Accepted solution
by seanferd Accepted solution
It could be an ASPI layer problem or DVD laser failure, if it isn't malware.
When the drive was uninstalled, was it uninstalled from Device Manager immediately before being physically disconnected?
by k.a.boatman Accepted solution
by k.a.boatman Accepted solution
by oh smeg Accepted solution
To this end try booting off a Boot DVD something like a Vista or Windows 7 Install Disc will do here to see if the DVD Drive is actually reading DVD's.
Every DVD Burner/Reader has 2 different color/wavelength LED's that are used to read the different Disc Formats. CD's use one color and DVD's use the other color so it is possible that one LED has failed and that Disc type is no longer readable.
This is mainly caused by leaving a Disc constantly in the drive and while the computer is turned on the Disc is being read. LED's have a limited Life which under Normal Use far exceeds the life of the DVD Drive that they are in not to mention the Computer that the Drive is Fitted to but when you leave a Disc in the drive all of the time this Life is soon reached and eventually after the LED looses Intensity or Brightness it eventually fails all together rendering the drive unable to read that Disc Type.
The other possibility is that the Software has been so messed up that the OS is no longer able to interpret the Signals that the DVD Drive is producing for at least one Format of Disc that can be used with it.
So in that case you need to Reload the OS to fix the problems that it has.
If the LED has failed or lost so much brightness that it can no longer read one Disc type you need to replace the Drive.
If you need a Disc in the drive constantly for either a Game or piece of Software that you use a lot you should load a Virtual Drive and copy the contents of that Disc to the HDD and use it through the Virtual Drive. If you do this you will be rewarded with a Faster access tot he Data that is required on the Virtual Drive and in the case of a NB longer Battery Life when you are away from a Mains connection.
Naturally here I'm assuming that you have tried more than 1 DVD to read and not are just basing this question on the failure to read one Damaged or otherwise unsuitable Disc.
Col
by k.a.boatman Accepted solution
by oh smeg Accepted solution
You already know that the CD part of the drive is working but have no way to test if the LED for the DVD side is still working so to do that you need a Boot DVD.
A Windows Vista Install Disc will do to test the drive with all you need do is see if it reads the drive and starts the Vista install procedure. They you can turn off the computer and allow it to boot off the HDD.
However you may be required to use the Boot CD to reload the system if the DVD part of the drive is still functioning. ;)
Col
by seanferd Accepted solution
This discussion is closed to new replies.
Trending Hardware posts
Sort by Trending