Question Locked

dvd rw drive wont burn dvd discs

0 helpful
12 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

On start up my dvd drive have atapi cd rom listed

on win xp pro my computer the drive is recognised as what it is.

put a cd or dvd in and it will play.
put a blank dvd disc in and the dvd rw changes to cd rom So no matter what burn software used wont burn any dvds.

I did not get any drivers with drive and there are none on any website just firmware which I have downloaded and installed.

how do I get win xp pro allow me to burn dvd discs

12 replies

by tintoman

at the front of the cd drive drawer, if it says something like cd rewritable and dvd rom then it is not a dvd writer and cannot burn dvd discs
post back for more advice if you are absolutely certain that this is a dvd rewriter

by bworder1

drive supports lightscribe.
dvd multi recorder r dl
rw dvd+r
the drives full name is
optiarc dvd-rw ad 7191A
which I found is a sony nec.
no drivers available. just firmware.

makes no difference putting in dvd-r or dvd+r discs.

by Former member

You will need to switch it DVD to burn data to your dvd disk. In nero select in the menu
"burn data dvd" for dvd's and "burn data cd" for cd's.
Hope this helps you.

Please post back if you have more problems or questions.

by bworder1

if I open nero and put blank dvd in drive the drive switches to cd drive so nero 8 essentals does not offer dvd option it open burn cd.

I also tried dvd flick and does the same thing

by Former member

Get hold of a "DVD + RW" and a "DVD - RW", put these in by one and see which one gets recognized. Some drives are only "plus +" or "minus -", while some are both. So this might help. If you are still having trouble then check the serial number under the drive, sometimes the drives get marked up wrong, your are thinking that you have a "multi drive" when all you have is just a cd burner.
You can check this out with this:

http://www.belarc.com/free_download.html

Please post back if you have more problems or questions.

by bworder1

I have 2 dvd drives and a usb drive.
none will burn dvd.
Each one when go into device manager say that driver is for cd rom drive. none list themself of having a dvd atapi drive or what ever it supposed to say when you install a dvd rw.
the xp software just wont id the drives as dvd.
I loaded a lower version of nero where you could choose dvd but all items listed are just cd versions.

by Former member

Go to your drive in "my computer" and right click on it and select "properties > recording" in the "desktop recording" box see if you can change the drive to "DVD".

Please post back if you have more problems or questions.

by job

I'm not a member, but I am looking for info on this problem 'cos I have it to. Its not the media, the software, the drive. Its not windows. Seems to be some problem with the drivers of with the IDE controllers. Commonly seems to happen after installing or re-installing new drives. Search "dvdrw wont burn" on Google and around 75% of hits are this problem. Still no fix I can find yet.

by cw_creativetouch

driver software optiarc dvd 7200a is missing
I have deleted the dvd burner and restarted the computer but when in device manage I try to update driver it gives me a message that it can't find the driver software.
So where do I og to find this without having to buy a program.
PLEASE SOMENE HELP ME
CAT

by peconet tietokoneet

Microsofts exact method of performing this procedure if you wish to read it: (scroll down to: Method #1: Remove the registry entry)

And some drive problems can be fixed using this method:

- Press on "START"
- Then on "CONTROL PANEL"
- Then click on "Administrative Tools"
- Then on "Computer Management"
- Click on the [+] of "STORAGE"
- Then on the [+] of "REMOVABLE STORAGE"
- Then on the [+] of "LIBRAIRIES"
Your CD Drive should be listed, click on it to enable it.
- Then try your CD tray to see if it opens and close normally.
- It should now also appear on the "My Computer"
.....................................
OR:

If you have a problem of non-detection, eg: drive is not visable in My Computer or Device Manager, then you probably need the "delete upper and lower filters in the registry fix". Here's a file you can download. Unzip it and run the file.... after performing this, reboot and Windows will automatically detect and install your drive. CdGone.zip:
http://cr.am/framed.php?url=http%3A%2F%2Fwww.aumha.org%2Fdownloads%2Fcdgone.zip&ref=driverguide

After unzipping this file to a temp folder, read the TEXT file for further instructions.

by cobrian.av

I had this EXACT Problem, and the solution for me was using Roxio Media Manager to write the files to the DVD instead of Windows. Worked like a charm...

This discussion is closed to new replies.