Question Locked

DVR viewing over VPN on W2K3 Domain

0 helpful
2 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Hello everyone, I am having a bit of a problem in connecting to my DVR remotely. Here is an overview of my present network setup.

Laptop (with DVR viewing software) >>>

VPN>>>

Internet gateway >>>
W2k3 DHCP server (with three NICs. VPN port open) >>>
W2k3 DNS Domain controller (with VPN access allowed) >>>
Target (Samsung DVR)

Now here is the problem:
I've installed the remote DVR viewing software on the laptop and try to connect to the DVR (over the VPN connection) but to no avail. If I ping the DVR, it responds, but if I use the remote viewer it does not connect. I then went onto joining the laptop to the domain, then retrying the connection, and IT WORKS.

Based on this I know that I can connect when the workstation is a member of the domain, and not when it is a standalone PC, however, I do not want the machine with the DVR viewing software to be a member of the current domain since it is going to be used to connect to multiple DVRs in multiple domains.

I would really appreciate if someone could help me to understand where I am going wrong.

Thanks,
Anthony

2 replies

by d.a.saleh

the best way to set the dvr on the router is setup portforwarding and best router for job is netgear best way is to connect to dvr with
the external ip address

This discussion is closed to new replies.