Question Locked

Easy VPN server

0 helpful
9 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I have configured VPN server on my router, clients are able to connect to VPN server but once it connected there are not able to access local LAN. please help me ASAP

9 replies

by nimmo

You will need to setup port forwarding to allow the connection to be passed through the router.

by vineeshthayath

Hi actually i want to configure VPN server on Loop back interface as we dont have any physical interface is free.is it possible? could you please send a sample configuration for this. I want to configure easy VPN server on a site to site VPN configured router.

by nimmo

You say it's a 2800 what brand is it? Cisco, Draytek etc..

by 1bn0

VPN is designed to give controlled access to the network.

Forwarding the ports on the router gives OPEN ACCESS to hose ports on the maachine/device the ports are forwarded to.

TO: vineeshthayath

Check your documentation or contact the device vendor. It sounds like your configuration for VPN may be incorrect or incomplete.

by nimmo

You would want to port forward if you have services that you need to allow outside traffic to access, such as an SMTP server, web server, terminal server etc....

You would also do it to specify what connections can pass through or be re-directed by the router. You need rules in the router so it knows where to send traffic.

by vineeshthayath

Can i configure VPN server on loopback interface on cisco 2801 router

This discussion is closed to new replies.