Networks

Ask something
Discussion Locked

Encrypted Dial-up access

0 helpful
3 replies

by alex2470

Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I have a Netware 5 and Windows 2000 servers in my enviroment.

I would like to give users access to the network from a dial-up platform.

Does anyone have a solution that would allow users users to dial and log into the network with a username ,password and encryption key?

3 replies

by wroming

What you have to do from the Windows 2000 server that you have the modem(s) in the server and then go to Routing and Remote Access in the administrative tools box. Right click on the server and click on configure. Choose the RAS server or if you want a VPN server you can choose that as well. But, if you are wanting users to dial in choose the RAS if you have users that are over a FAST connection Cable/DSL or better choose the VPN if you dont already have a VPN Concentrator. Then just follow theprompts and it walks you directly through the process. After you are complete the server should have an up green arrow instead of a red down arrow simbolizing wether the services are running or not. I hope that this helps out. If you need futher assistance email me at wroming@ci.killeen.tx.us

This discussion is closed to new replies.