Discussion Locked

Epson Stylus Color 850 print gibberish

0 helpful
9 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
Our epson Stylus Color 850 will only print out gibberish, it looks like all different fonts and commas. Even when trying to print one word it will print out pages and pages of gibberish until the paper runs out. Initially iy happened only once in a while but now it will not print anything else.Our computer is a hp pavilion 522a Do you have any advice on what we can try to do..many thanks

9 replies

by thechas

1. Check in device manager that your printer port is in ECP/EPP mode.
If not, you will need to enter BIOS settings to change it.

2. Are you using ANY kind of printer switch?

3. Are there any devices connected between the PC and the printer?
Zip Drive, Scanner, etc.

4. I have had to un-install the printer driver, un-install the printer fonts, and manually remove printer related files for this kind of problem in the past.

Start by a simple un-install and re-install of the printer driver.

I suggest downloading the latest driver from Epson.

Chas

by csmith

I have seen this problem twice in the last month, on this model of printer.
Both times the printer driver selected was an HP.
One time it was a HP 4L driver selected.
Another it was a 812 Inkjet.
The problem is that HP uses PCL and Epson uses
These two languages are as different as english and japanese.
Thats what causes the gibberish.
Check that the Epson 850 is selected as the printer, and the proper driver is loaded.
Regards, Chris

by murray brydon

I had a problem like this where it turned out to be a faulty printer cable. I'd try the other suggestions first, but if you get nowhere then changing the cable is worth a try.

by rboggio1

What OS are using? Epson does not make drivers yet for XP. WIN2K drivers work but there are some subtile tricks to get them working. Your comment "Initially iy happened only once in a while but now it will not print anything else." would suggest a physical connection problem i.e. cable or port. As pointed out earlier if there is a switch or any type of "box" between the printer and workstation take it out and try again. A side note that might help, have you changed, added to or removed anythingfrom the system prior to this happening?

This discussion is closed to new replies.