Question Locked

Ethernet Driver Removed

0 helpful
2 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Bear with me for a sec: Earlier today, while actively on the internet, I came across an issue which caused the load screens to stop and, subsequently, show an error loading any pages. I contacted the cable company expecting it to be the modem's problem, and after the technician walked me through their troubleshooting, we determined the modem not to be the cause. Instead, I was told to contact the manufacturer as the computer was no longer responding to the internet.

Now, while on with the manufacturer I came across the device manager and for some reason my ethernet driver had been removed. Never happened before, and of course the modem is tied into the computer via ethernet connection. The network driver was installed and working correctly but apparently the ethernet driver itself was gone (showing a "?" in the description).

Any ideas as to how this may have happened, what i might have done, or what I can do to prevent this from occurring again? I now have to download the driver from the internet onto a disc in order to update the computer. Thank you for your help, sorry if this is the wrong place to be asking.

2 replies

by hal 9000

This normally happens because of some kind of Viral Infection or Mal Ware Attack.

Either way the solution is simple install Update both and AV Product and some Spy Ware/Mal Ware Products and regularly scan the system for infections.

You should have a AV Product already just make sure that it's up to date when you get back on line but you can download the following Spy/Mal Ware applications from here

Ad Aware SE

http://tinyurl.com/qoppr

Crap Cleaner

http://tinyurl.com/rc2fn

Spy Bot S&D

http://tinyurl.com/yrwy2

When you have these installed you'll need to update them with the currently available updates through each programs update interface and then reboot the computer to run in [b]Safe Mode[/b] to perform the scans so that you can pick up and remove any thing that you find.

Just a note of caution here Spy Bot S&D sometimes will pickup software that you have installed as Spy Ware so if this happens you need to remove it from the Repair List by removing the tick from the box beside any software that you want to keep and then allow the repair to go ahead.

If you miss something that you use you'll need to reinstall the software for it to work. But generally speaking Spy Bot S&D only picks up Windows Defender, some Internet Banking software and some free downloaded software that some domestic people use.

Col

This discussion is closed to new replies.