Question Locked

Ethernet switch

0 helpful
6 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I have two internet connections available at home on a hi speed cable. I want to use one with my laptop and one with my home desktop. The problem is currently I keep pulling out the cable and shifting it between my laptop and my home PC. The setting for both ISP's are different so its not like I cna place a wireless router. WIll a ethernet switch help.

6 replies

by cg it

a layer 3 switch would do the job but their awfully expensive.

What you need is 2 wireless routers. Hook em up and then configure your laptop to connect to both. Then just choose which one you want.

by jeremyh

Just get one router and plug both internet connections into the router and tell your laptop which gateway to use. Make one connection 192.168.1.1 make the other 192.168.1.254 or ect.... set your laptop or pc static and your done.

by choppit

If you're just tring to maximise bandwidth available to both hosts you could use a load balancing router. In the past i've used a nexland unit (now part of Symantec) with great success. I believe D-Link also make units that will do this.

by roshan1

Thanx for the reply, My probelm is with one cbale on which both ISP's are available I can connect the wire to only one unit!! SO do I conntect the wire to the Router or to the switch!! And then what do i connect those to. Sorry to sound so dumb!! I know nothing about this stuff.

by triathlete1981

i don't get it. you have two internet connections and two systems you want to which you want to connect the internet. if you keep moving the cable from laptop to desktop, then there's, by process of elimination, one internet connection that's not being used. simply use the second internet connection to connect your laptop to. even a low end hp procurve'll make you a few hundred dollars poorer. am i missing something?

This discussion is closed to new replies.