Discussion Locked

Event ID: 11

0 helpful
8 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I have a Compaq Evo n610c laptop with 40 Gb hard drive from Fujitsu. Lately, I been having some error msg in the Event Viewer, and after 3 days of uptime, Windows Explorer would fail to display the content of C drive (there is only one partition); yet, OS is still up and runnning.
It is an IDE drive, so it is not SCSI. Also, originally, the HDD would operate at DMA5, and after the error msg, it would drop down to DMA4 and so on. Here is a copy of the error msg in the Event Viewer:

Event Type: Error
Event Source: Disk
Event Category: None
Event ID: 11
Date: 1/23/2003
Time: 8:35:58 AM
User: N/A
Computer: THUNDER
Description:
The driver detected a controller error on \Device\Harddisk0\D.

For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Data:
0000: 04 00 68 00 01 00 b6 00 ..h...?.
0008: 00 00 00 00 0b 00 04 c0 .......?
0010: 01 01 00 00 00 00 00 00 ........
0018: 00 00 00 00 00 00 00 00 ........
0020: 00 ce 8d58 07 00 00 00 .??X....
0028: ef 2f 4b 00 00 00 00 00 ?/K.....
0030: ff ff ff ff 03 00 00 00 ????....
0038: 40 00 00 8f 02 00 00 00 @..?....
0040: 00 20 0a 12 80 03 20 40 . ..€. @
0048: 00 00 00 00 0a 00 00 00 ........
0050: 00 00 00 00 68 7c 7f 81 ....h|?
0058: 00 00 00 00 00 be 5b 81 .....?[?
0060: 02 00 00 00 e7 46 ac 03 ....?F?.
0068: 2a 00 03 ac 46 e7 00 00 *..?F?..
0070: 03 00 00 00 00 00 00 00 ........
0078: f0 00 04 00 00 00 00 0b ?.......
0080:00 00 00 00 08 03 00 00 ........
0088: 00 00 00 00 00 00 00 00 ........

Please keep in mind that this problem doesn't prevent the computer from booting up. Once rebooted, it will be fine for awhile at the rate of DMA5 until error msg shows up again.

8 replies

by thunderriver

Hi I been there before through Google, and their main concern is about SCSI drive, which in my case is IDE. There is no such thing as firmware update for IDE HDD. Maybe there is one, but I don't see it anywhere around for Windows XP. Thanks for the help though. Quite a few pep suggest about replacing the hard drive. I guess that's one way to go then.

by memyslfni1969

I get the same error but for a cd-rw along with event ID 7 and 9

MOBO driver/chipset update or lower your DMA manually to DMA4 in BIOS.

*Try switching the hard drive to the secondary IDE controller(if you have one) and check cable connections and try new cable, also remove any other devices from the daisy chain on the cable.

*Run Hard drive diagnostics on your resource cd or provided by your manufacture of you harddrive for bad block or sectors. I suspect your drive is going bad.

This discussion is closed to new replies.