Discussion Locked

Event Viewer in Windows 2000 Advanced server

0 helpful
1 reply
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

In my Windows 2000 Advanced server, when opening Event Viewer , I often two notification of errors as follow :

1-
Event ID : 10047
Source : RSVP
Description :
QoS RSVP has failed to find any interfaces with traffic control enabled . Install QoS traffic control services via network and dial-up connections.
============================================
2-
Event ID : 10035
Source : RSVP
Description :
This host can not be ACS since the Active Directory has not been properly configured via the QoS ACS management console. Please configure the subnets via the QoS ACS mangement console.

I greatly appreciate your kindness if helping me to eliminate the two notifications.
My new email : notranglong@hcm.vnn.vn
or netscape2002@netscape.net

1 reply

by Member 19528012

to start with, RSVP, incase you didn't know, is

"Provides network signaling and local traffic control setup functionality for QoS-aware programs and control applets."
(thats from "http://www.wilsonmar.com/1winsvcs.htm")

To enable/disable this it is on the network connection properties page (where you would go to set the ip address), should be able just to take the tick that is there away.

P.

This discussion is closed to new replies.