Question Locked

Extending size of logical drives

0 helpful
3 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I have increased the size of the physical disks and need to increase the size of the logical drive.

I initially took out the secondary drive (was a 72 GB ultra 320 SCSI) and replaced it with a 146.8 GB Ultra 320 SCSI. This ia with hotswaps. The array configuration picked this up nicely and mirrored the primary to it.

I then powered of the server and removed the primary HDD, booted from the secondary and it worked first time. I now put in my second 146.8 GB SCSI HDD and it has been recognized.

However, there is now massive unused space. I am also given the option to extend size.

1. is it safe to extend the size of the logical drive while a live site is running on the server (hopefully yes, and there will be no downtime on this)?

2. would I need to reboot the system to boot from the primary, and then configure it?

Your help is much appreciated.

3 replies

by cmiller5400

Like the what OS you are using, what is the make/model of the server and RAID card?

As always, have a good, verified backup before doing anything with RAID. I have seen it puke doing the simplest of things sometimes...

by cydolf

Well it's a server 2003 standard (32 bit).
I believe it is a HP DL360 G4.

I think we are using embedded controllers, (it comes with Smart Array 6i controller).

is there anything I missed out?

I am running the NtBackup now....thanks for that tip.

This discussion is closed to new replies.