Question Locked

external harddrive prevents windows from booting.

0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I recently bought a new gateway where windows is on an sata hdd. However whenever i plug in an external hdd via usb or even with my pci card (because my other drives are eide) windows will not boot. I've gone to the bios and the boot settings show to have it boot from the sata drive first.

7 replies

by wizard-09

Plug the drive in after the computer have booted, it's a simple fix and easy to do i call it a work around cause i dont have the time to like at it lol

by musictoad84

that works for the external hdd but i still have 2 that i want to get to work using my pci card that have the same effect. I probably should get the converter and turn them to sata but i was hoping there was an easier way

by wizard-09

How have you got it configured, you need one set to master the other to slave the master should be the one with the OS loaded on it.

Check the jumper settings on the HD's

by robo_dev

One of my Dell PCs does this, the BIOS setting for legacy support is the cure. Can't remember if you need to enable or disable it.

by musictoad84

The OS (vista) is running off of an sata drive connected straight to the motherboard. The drives im having issues with is when i plug an eide into my pci card which i have tried setting it to both master and slave.

by robo_dev

Sometimes it takes time for some things to init, and it gets all confused.

This discussion is closed to new replies.