Some USB Adapters may get disconnected after a little while. A possible reason that could cause this problem is that in Windows XP there is an option that allows the Computer to turn off a USB device to save power. To disable this option:
1: Right click My Computer, select properties
2: Click the Hardware Tab and press Device Manager button
3: Expand the universal Serial Bus Controllers
4: Double click on the USB Root Hub
5: Select the Power Management Tab and un-check the "allow the computer to turn off the device to Save Power
If you have more than one USB Root Hub, then you should apply the steps to each one of them. That's it, Reboot
If you are using a USB cable with your device, check the cable to make sure it matches the speed of the device. Use USB 2.0 cables with USB 2.0 devices and USB 1.1 cables with USB 1.1 devices. Swap the cable and check the device.
External drives shouldn't be connected all of the time. The safest way to use them is to only connect them when you are useing them. If you are not accessing the drive disconnect it.
If you think that any of the posts that have been made by all TR Members, have solved or contributed to solving the problem, please Mark them as Helpful so that others may benefit from the outcome. ;) :D