Discussion Locked

Failed internet access using RRAS

0 helpful
4 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I have a lan of about 25-30 computers running win2000 server/professional os.Internet access is got thru a vsat connection to the gateway server.i have used rras to configure internal and external interfaces.Everything worked well but after a while i find that the clients cant browse properly anymore.The gateway server mwl, browses well,the clients can chat using their yahoo messenger.I can ping public internet ip's but sometimes pinging www.yahoo.com fails, though not always.But the issue is that the clients cant browse.I've checked and rechecked all the settings incase they were changed but came up wt nothing.I need help in sorting this out asap pls.

4 replies

by quintar51

I ran into the same problem, also with a RRAS gateway. The problem ended up being that I had 2 gateways specified in my routing table.

Go to a command prompt, type ROUTE PRINT. You should only have 1 route with 0.0.0.0 as the destination address.

The problem is that you have 2 nics, one internal and one external. However, I assume you have a connection to the internet as well, which you have to establish. So let's say on your external nic you have a gateway specified, then when you use the internet connection, it also received a gateway from your ISP, hence giving your routing table 2 gateways. What you have to do is get rid of the gateway on your external nic.

by ned2

I already checked this out and it's ok.But Problem still persists.Thakns though.

by d.walker5

If there is no Proxy Server, I suspect a DNS problem. From a non-browsing client can you ping an external IP address (66.218.71.198)and the FQDN (www.yahoo.com?) Can a non-browsing client fix the problem doing a ipconfig /release /renew?.

If your VSAT provider uses a proxy server, I suggest contacting them for help.

This discussion is closed to new replies.