Discussion Locked

fatal exception 0E at startup

0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

i'm running 98SE on a P!!! 933 with 512MB RAM. when the machine is booted i receive a fatal exception error 0E at 017F. i have tried many combinations of startup options and run many utilities to sort out the problem. the RAM seems to be ok (i've also tried one stick of RAM and both sticks on different DIMM slot combinations) as all the tests i have run to date come up with no problem (and certaiunly no bad RAM that can cause such errors).

i did receive once an 0B exception which i believe is when a memory segment is marked 'not present', though thats where my knowledge of it stops.

i tried using other utilities like startcop and got rid of most of the programs loaded at start up. for a while i thought i'd figured it out. i didn't get an exception for some time. though thats usually how it works, a series of good boots and then the error.
after the recent 0B exception i rebooted and got the 0E exception again.

i've removed the himem.sys and emm386 lines from config.sys. i've removed the cd device driver from config.sys also. the only
thing i can't get rid of is the sound blaster (vibra128) lines from autoexec.bat. ever time i delete them, they misteriously reappear
on the next boot. at one stage, every time i wouldselect shut down it would just restart, and then the problem just went away. also just after the 98 splash screen the machine tries to access the cd-rw drive and then the cdrom drive for some time. can't seem to sort that one out either.
i'm stumped!!!

at the end of it all, does any of it sound like a motherboard problem?? any other ideas would be very much appreciated. as i really am stumped.

7 replies

by hrhold1

WOW......OK. First, can you boot in 'Safe-Mode'? If you can go to :
Start\Programs\Accessories\SystemInformation, once there Click on Tools,choose System Configuration Utility.
Once here, (General Tab), you have a couple of options; (1) choose Diagnostic StartUp, or (2) choose Selective startup and disable all features and re-instate them one at a time to locate where a problem may lie. Reboot your machine after instating each option and leave each selected option available after you determine it was not the cause. The one that 'Hangs' your system is the culprit.

Secondly if you have a udf progarm, such as abCD, disable it or un-install it for the time being. As far as your Autoexec.bat file try the 'REM' statement before the lines you wish to disable, but it sounds like your card is PnP and will load the drivers automatically anyway.

Option #3, CHECK your IDE Cable to your HardDrive or replace it with a new one.

Option # 4, If you can boot with a Startup disk, try to access your windows folder and execute windows from there, if you can, you you just may need to ADD/Remove Programs/Windows Setup and Add/Replace missing files.

You pose a few interesting delimas, I hope this amy solve at least one. H

by jmatt

http://www.langa.com/newsletters/2001/2001-01-18.htm#5

5) Awesome Free Resource For Solving OE5 Problems
Readers often ask how to back up their Outlook Express files; others
ask how to correct problems in OE itself. Reader Mordy Cohen--- in the
process of solving his own problem--- found a great resource that
addresses all those issues:

Installing IE5.5 over IE5.0 is not recommended by many (including you -
if I recall correctly). Some time ago I updated my OE to version 5.5
(ver 5.50.4133.2400 in the about window) from the Microsoft site
without updating IE (it is ver5.00.3105.0106IC). I then started to
see some strange printing phenomenon. Some E-Mails would print with
small fonts and others with larger fonts without any logical reason.
Knowing that all those E-Mails where regular text - not HTML ones,
I started looking in to the problem and here is what I found out.

First, the printed font size of OE is controlled by the font size in
the View|Text Size menu of the IE. Second, Changing the font size in
OE has no effect on the printed font size of its own E-mails only on
the screen fonts!

So, I backed up all information (accounts, E-Mails, news and address
book) and then uninstalled OE5.5. I used Microsoft's OE5RegClean.exe
(at http://support.microsoft.com/support/kb/articles/q256/2/19.asp
to clean the registry, rebooted and installed OE5 from the original
WIn98SE CD. The problem was solved even after I went to the Microsoftsite and updated the two to ,
http://www.microsoft.com/windows/ie/download/ie501sp2.htm
-------------------------------------------
http://www.windows-help.net/windows98/troub-344.shtml
http://support.microsoft.com/support/kb/articles/q176/4/46.asp

http://www.chasms.com/mskb/potpourri.htm

by jdfcomputer

You won't believe the fix.

Once you get into windows go into the network settings and remove client for microsoft networks and reinstall it.

Also make a change to the network settings anywhere to force the os to recopy and reconfigure the files.

REBOOT!!! - done

This discussion is closed to new replies.