Discussion Locked

Firewall, Use Router or Buy External Box

0 helpful
2 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I'm a Junior network admin at my company of about 10 people. We have a windows 2000 domain network connected to the net via dsl. The netopia router we're using has a built-in "basic Firewall" but doesnt really seem to cover the needs of my company. We are a contractor for the Department of state and therefore have highly sensitive yet declassified information on our network. what would be our best bet for a firewall/network intrusion detection?

BTW - explaining the need to purchase new equipment to my boss is like teaching an 80 year old to bungee jump...they'd just rather not. needless to say, under $400 is my best bet.

BBTW. here is a copy of the "basic firewall" rules my router has...do you have any recommendations for other rules that may help? the only thing I need to get into the network with is my VPN using "MS Win2k routing and remote access"

--SRC----DST----PROT----SRCPORT--DSTPORT--ON--FWD
0.0.0.0 0.0.0.0 TCP NC =2000 Yes No
0.0.0.0 0.0.0.0TCP NC =6000 Yes No
0.0.0.0 0.0.0.0 ICMP =8 NC Yes No
0.0.0.0 0.0.0.0 ICMP NC NC Yes Yes
0.0.0.0 0.0.0.0 TCP NC >1023 Yes Yes
0.0.0.0 0.0.0.0 UDP NC >1023 Yes Yes

2 replies

by wan_wizard

A very inexpensive solution would be the Linksys firewall. Should run less than $90. You can config 'vpn' ports to forward to an 'inside' host or setup a DMZ for your vpn server device. You would probably want to put this unit between the ISP's equipment and your router. The only trick is to keep the firmware updated.

If you need 'content filtering', you should look at the sonicwall product line. It's a tad more expensive, and requires a yearly subscription to the content filter data,but is a great fit for companies that have issues with productivity losses potentially related to internet browsing.

by lordinfidel

The learning curve is higher, but the payoff is big.

Plus it's relatively free.

On a side note.... Never list your firewall rules in an open forum, e-mail, etc. Or any other security sensitive doc.

The first rules you should always have are block in all and the last rule is drop all.

Pick up Building Internet Firewalls from O'reilly. It is a good concept book that will explain the basics of firewalling. Then pick up Linux Network Admins Guide, also from o'reilly. There is a goodsection on firewalling in it.

This discussion is closed to new replies.