Question Locked

flushing MAC address from cisco switchs?

0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

For some time now, i've been plagued by this problem:

Unfortunately I know nothing about cisco switches, hence connecting to it to look for the problem would probably not be a good idea.

I get a limited connectivity network occasionally on some of our machines, claiming a failed authentication due to no availability of our domain controller. But when I use a different laptop or machine on the same port it connects to the domain fine.

This is what leads me to beleive that the switch is holding information related to the mac address on the particular terminal (or it could be some authentication data in the registry??).

I have checked all security protocols on the terminal (when it occurs), checked terminals location in AD etc, used packet analysers which shows what is possibly switches asking questions but are asking for what looks to be information on another terminals name (could the AD machine database be corrupted?)

Any help or further clues would be really appreciated.

7 replies

by cg it

if another computer operates just fine on the same port.

it's not switch security either because the laptop can obtain connectivity on the same port.

Try the machine in question on a different port. If the problem persists, its the machine not the switch.

Cisco switches automatically purge MAC address in their tables if that MAC address isn't contacted within a certain period of time.

by duncan_hills

For anyone thats interested, The machine name was for some reason deleted from active directory. Which is a concern as it happens sporadically. Now the problem is that it will only join the domain on a particular vlan. Will have to post another thread :s

by dumphrey

running configs? minus any password hash or public ip info/company names of course. It may be that switchport mode security is on or mac address sticky. Dang, its been a while since I dug around in a switch. But, I do know that even part of the running config will get your problem solved 100% faster.

by duncan_hills

But the department manager doesn't want me playing around with the switches (new multi million pound network he doesn't want broken). The rest of the politics arn't worth getting into. Thanks all the same for the advice, I will take note of it once permission to "fiddle" is granted!

My temporary solution involved physically taking the machine to our office (separate vlan), aquiring connectivity to the domain (creating the computer name in AD), which then allowed it to be authenticated again in its original network.

My concern now is not really the switch, it is why/how my terminals names are being deleted from AD!!!!

We did have to shut the whole system down recently due to an air conditioning failure in our server room, and when this has happened in the past (powering off and resetting of all switches/servers), user profiles have become corrupt (students having staff accounts etc) and im assuming this is another possible error we are noticing.

The search continues, but any further ideas welcomed :)

by dumphrey

that would be a priority =/ Good luck with the corruption hunt, I just had one with our Phantom Disappearing DNS Zones. Apparently the root cause was a bothed 2000 to 2003 upgrade a year or so ago.

by duncan_hills

what scares me more is the possibility of corrupt profiles giving administrative permissions on basic student user accounts!! Only setup of DNS i've really had much involvement with was setting up a basic dns server on linux (which i was a very amatuer user of), and it seemed a lot more basic than setting up on w2k server!!

Time for my next thread... flashing status led's on cisco 1130ag wireless access points!! (not aquiring ip through DCHP).

This discussion is closed to new replies.