Discussion Locked

Formatting HD > 10GB

0 helpful
4 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Each time I format a HD using "format.com" I can see only 2.1GB of a 10 or 20 GB HD. I use Fdisk first then I do the format. Can anyone suggest how I can retrieve my entire 20GB space?
I tried an old DM1 program, but it splits the drive into several partitions and never sees the entire 20GB. Is there any program that can let me see my 20GB after a format?

Thanks

4 replies

by nickw_uk

Sounds like you are using DOS versions of fdisk and format, i.e. not the ones supplied with Windows 95b (I think) and above. Have you tried using a Windows 98 boot disk?
Do you get the enable large disk message when going into fdisk?

by djent

That is the limit of a FAT16 partition. Its time to move on to FAT32, NTFS, EXT2/3 or some other current file system.

by pctech

The other two responses are correct, but there are two other possibilities. When using a Win95B - Win98SE bootdisk, you also need to sellect the large drive option when FDISK first starts. You also need to check the BIOS settings to ensure you are using large disk access ( LBA ) and not the "normal" setting. . FAT12 is limited to 20 Meg. partitions, FAT16 is limited to 2.1 Gig. partitions, and FAT32 is supposedly limited to 32 Gig. partitons although I have FDISKed and partitioned 80 Gig. hard drives without any detrimental effects. When formatting a hard drive with an 80 Gig. partiton, DOS will display that it is formatting a 10 Gig. partition but all of the partition will be there and formatted correctly. I have not experienced any adverse effects from this. I have also discovered that XP has a 137 Gig. partition barrier until SP1 is installed. .... I hope this helps you.

This discussion is closed to new replies.