Discussion Locked

Framebuf during Install of Win XP pro

0 helpful
1 reply
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Hi,
What can be do?
Installing win xp pro I got on the screen the following message:
Framebuf XXX Stop 0x60EA(0x80D46B58, 080DA3008, 0x80D7D2B0, 0x00000001)
Device driver problem.Contact the manufacturer of the hardware.Etc.
What is framebuf?
The mainboard is a AT formfactor,700 Mhz proc,PC133 GFXcel etc.

Robert

1 reply

by oz_media

It sounds to me like a hardware issue that is a card not compatible with XP (probably video).
BUT...I assume you ran the diagnostic check to ensure hardware is compatible.
I've seen an older case of this with Win98 and you can download a Framebuf driver from Driverguide.com, I don't know if tere is an updated framebuf driver for XP but it's worth checking for one.

Another thing to try is to make sure you have the latest BIOS update for your MOBO and remove all the cards BEFORE installing XP. Disconnect firewall, modem, router etc. first.

This discussion is closed to new replies.