Discussion Locked

Frontpage 2000 server time's out error

0 helpful
31 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

HI!
I have a coworker that teaches FrontPage 2000. Each student in her FrontPage class has a personal folder on a Windows 2000 Server to store anything they are working on. We don't allow them to save anything to the local drive. Here is the problem. When the students try to create a web and save it to their personal work space, they receive an error stating that the server has timed out. It finishes the process, but does not create the Web. IIS 5.0 is installed on the Windows 2000 server with the server extensions. The students can create their webs to a floppy, but that takes half the class time just to do. A work-around was to allow them to save to a folder on the local drive. That works fine, but again, I don't want the students saving to the local drive. I did a full install from Office 2000 Premium CDs to the local machines. This is becomming very frustrating. Any ideas???? Thanks in Advance

31 replies

by shanghai sam

1)Server properties-The property provided by the Server is Script Timeout,which basically provides a page with the means for extending the default script timeout.You may want to set the default time out to be longer than is set to execute.
2)Timeout property allows an ASP application to set length of time an ASP session will be allowed to stay idle before being terminated.Timeout enables a page to extend or reduce the default session timeout for 20 minutes.
The last part of your question is that the site is expierencing difficulties and has some problems at the server.

by shanghai sam

Thank you for your answer. Where do I adjust the timeout properties function. Your alias is not listed or invisible, so thanks whoever you are!!!!

by dmiles

the previous answer was submitted by soulrider,hopefully it could be helpful

by arg cio

Make sure all of your users have an account on your server. If they don't have lan access, they can't publish to the web server. Check the IIS properties of each of the "sites", and make sure the users are set as "operators".

by zendeath

Have you check out to see if they have anough space allocated to them on the server, like 1mb per user folder.
or have you tried mapping a network drive and saving to the maped drive.
check out the registry on one of the work staions check connectors witch port or were is is publishing to.

by leizure. . .

Do your students 'publish' or save their work to the server?
If they are just saving then perhaps you have the wrong approach to your problem!
Ceate a folder for each user on the server and map a drive letter to it, you should then be able to treat it just like a local drive.
Hope this helps
Dave. . .

by davedel

After you have the Web set up on the server with the server extentions you will need to grant the users permission to author/browse the web site from with-in Frontpage. From Front Page open the WEB, with admin permissions, got-to tools--security andadd the users to the web.
Dave,,

by jmstitt

Well, It has been 30 days since I have first posted. I have had many good suggestions, but none have worked. Here is some more information. I have uninstalled IIS5.0 from the server. I am just using the server as storage for student files. Whena student logs in at a workstation, the login script gives them a mapped drive to their personal directory EX:(net use t: /home). Frontpage still times out when creating a Web to that mapped drive. The student can create the Web to the local driveor a floppy. After Frontpage creates the Web to the local drive of floppy, the files then can be copied to their personal directory. Just can't get it to create the Web automatically to their personal directory - Thanks for any suggestions.

by rvkempen

You might like to check your DNS settings.
If you are working with w2000 domains, the dns must point to one of the dc's.
On the domain controller you can decide if the dns server also will be used as a forwarding dns server.
If youre primairy dnsserver is on the internet, the client wil first try to resolve your servers name on the internet, and when this failes, it will check through wins (when this is enabled on the server this might work, but ofcourse this is very slow).
Ofcourse you should always try to take away the problem, and not set time out values higher.

Hope to have helped you out.

by dmiles

Extension to answer#1
Open Regedit32
HKEY_LOCAL_MACHINE/system/currentcontrolset/services/w3svc/parameters/scripttimeout

by jmstitt

There is no key matching the scripttimeout parameter. Should I make one and what should the value be. Please instruct!!! Thanks Soulrider

by jmstitt

I am sorry that the answers are not rated. The system won't let me. It says the user is deleted. I emailed Techrepublic, but I received a canned response saying they cannot fix these problems. I posted the question 3 times trying to correct the problem, that is why you see it three times in the top 5 questions.

by rvkempen

So what about the other 279 questions you never rated ?
questions asked = 280
questions rated = 0

by jmstitt

Dear RVKEMPEN,

I don't know where you are getting your numbers from. Perhaps you are looking at the User_Deleted profile. I have asked a total of 7 questions (including this question repeated 4 times) to this forum which have all been rated. If you want the points that badly. . .I will open another question. All you have to do is post a reply and I will rate your answer as acceptable. I will give you ALL the points no matter if your answer helped me or not. I appreciate any answers that have been previously given. I have tried all of them. None have helped. I am a little discouraged, but I am also confident that an answer will be found.

Sincerely,

James Michael Stitt

by blaine moore

Have you tried copying first to a media such as a zip disk and then copying them physically at a later time? It works as a workaround if you can't solve the core issue.

by jmstitt

Thank you for your answer. We have been transfering some webs from the local drive to the user's home directory using the network. It is a work-around and a pain as well. Thanks

by cavedweller

Try adjusting the timeout in the server properties. You probably want to set it longer than the class length just in case someone stays a little longer to finish up.

by cavedweller

apparently the author wasn't really interested in a solution and tech republic isn't smart enough to tell when open questions get old.

by paul d. masley

Create a folder for each user on the server and map a drive letter to it, you should then be able to treat it just like a local drive.

Paul

by estebandelatorre

You need to check for proper DNS health.
If you are working with w2k domains, the dns must point to one of the dc's.
The DC can decide if the dns server also will be used as a forwarding dns server.
If youre primairy dns server is on the internet, the client wil first try to resolve your servers name on the internet, and when this failes, it will check through wins (when this is enabled on the server this might work, but ofcourse this is very slow).
Also you should always try to take away the problem, and not set time out values higher.

Hope it helps!!!

by maxwell edison

This error can occur if all of the following are true:

The following software is installed on the client:
Microsoft Windows 2000
Microsoft Internet Explorer 5.0
Microsoft Windows 2000 Service Pack 2
Microsoft FrontPage 2000 or Microsoft FrontPage 2002
The following software is installed on the server:
Microsoft Windows NT 4.0 or Microsoft Windows 2000
Microsoft Internet Information Services
Microsoft FrontPage Server Extensions 2002 or SharePoint Team Services

RESOLUTION
You can prevent the error described in the "Symptoms" section by installing the latest version of Internet Explorer. To download and install the latest verion of Internet Explorer, visit the following Microsoft Web site:

http://www.microsoft.com/ie/

Maxwell

by soekratis

create an empty html file and save it to each users folder. if they are using frontpage, run the application first, then point it to the personal folder and open it.

by alpha-male

Wow...talk about a lot of answers to all three postings of this. These questions should be killed.

by acattr

JUST TRYING TO MAKE THIS QUESTION LONGER AND MORE ANNOYING.

JUST TRYING TO MAKE THIS QUESTION LONGER AND MORE ANNOYING.

JUST TRYING TO MAKE THIS QUESTION LONGER AND MORE ANNOYING.

In the f
ield below,
type
the text of
your
an
swer. T
o rece

mail al
rt when
your an
swer is rated, b
e sure tAli
as:

t alias: w
wwacn
y@
yahoo
.co
select the Not
ificat
ion

option. For be

st results, we
suggest you proo
fread
your en
t

click

ing the Sub
mit My
Answer button.

Review

om

NOTE: The alias
abov
e will appear as

your attribution bo
h in discussions and in our Te
ollow this
link to you
Account
page.

Question:

Frontpage 2000 server time's out error
HI!
I have a coworker t
hat teaches
FrontPage 2
000. Eac
h student i
n her Fron
tPage class
has a personal folder on a
Windows 2000 Server to st
ore anyt
hing they a
re working o

n. We don't allow them to save an
ything to the
local dri
ve. Here is the problem.
When the students try to
create a w
eb and save it

to thei
r personal work spac
e, they re
ceive a
n error s
tating that
the server has
timed out.
It finishes the
process, but does not create
the Web. II

5.0 is install
ed on the
Windows 200
0 server
with the
server exte
nsions. The stude
nts can c
reate thei
r
webs to a floppy, b
t that tak
es hal
f the clas
s time just
to do. A work
-around was to allow them
to save
to a folde
r on the local driv
e. That works
fine, bu
t again, I don't want th
e students saving t
o the local dr
ive. I did
a full i
nstall fr
om Office 2000 Premium CDs t
o the local machi
nes. This is bec
omming very frustrat
ing. Any ideas???? Than
ks in Advance

by dlafrombois

If you use a proxy server to get to the internet, you may have to either turn off the proxy or set the ip address or DNS information in the bypass proxy setting.

by sparrow

I have used FP extensions for many years to publish. Unlike the jerks who complained above and made guesses like a monkey typing at a keyboard, I can tell you that Microsoft software using FP extensions cannot publish to a mounted drive other than a local Microsoft mount. It cannot publish successfully to Unix, Linux (Samba) or Novell mounts; it will time out.

It will also timeout if there are very large files. I have been seeking a way to solve this for some time but have not found it. However, there is a way when published to flag those large files and tell the system not to publish them; then the rest of the web will backup or publish without timeout errors.

Wish the news were better.

This discussion is closed to new replies.