3 replies
by flameo993 Accepted solution
by seanferd Accepted solution
It will run best at the start of the drive, anyway, so reinstalling is probably your best bet. Reinstalling will also remove any problems with boot files and the MBR.
Just install it over XP, then delete the old Vista files.
Otherwise, you could use this
http://www.partition-tool.com/
or you could also use it after the fresh install to set things up as you like them.
by rob miners Accepted solution
with seanferd here as I wouldn't run an OS that wasn't on the Primary Partition. Boot with the Vista DVD and on the first screen click Next, click Repair your computer, click Next and select Command Prompt.
Using the commands below will erase the hard drive and you can repartition during the install.
For example, from a command prompt, type in these commands and press Enter after each one.
diskpart
select disk 0
clean
Type exit and press Enter. Again type exit and press Enter to restart the System and install the OS.
This discussion is closed to new replies.
Trending Hardware posts
Sort by Trending