Question Locked

Getting The Ip Address Connected to My Router

0 helpful
25 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

hi
i have a wireless router/modem and 2 comps and 1 satellite TV box witch is connected to the Internet throw the router throw a cable.

i have connected the comps throw the wireless network but couldn't connect the satellite box so i had to connect it throw wires , so my router is near my satellite box and TV , i wanna try to see if i can hook the TV to the comp throw the satellite box.

my problem is that i can't find the ip address of the satellite box, so i can start checking if it's even possible(i know some network security )

my router/modem is an ASUS one and it dosn't have what ips are connect to it , is there a network tool that can detect the Ip Address connected to my network.

thanks

25 replies

by older mycroft

[b]THROW[/b] [u]Verb[/u]

Propel through the air
Move violently, energetically, or carelessly
Get rid of
Place or put with great energy
Convey or communicate; of a smile, a look, a physical gesture
Cause to go on or to be engaged or set in operation
Throw (a die) out onto a flat surface

[b]THROUGH[/b] [u]Preposition[/u]
By means of; with aid of; through the act or agency of;

[i]Now that we've ratified which word you SHOULD be using, I haven't got a clue what you are trying to achieve connecting a Satellite Box to the internet - even if you were to THROW it THROUGH hoops![/i]

by sex_porn_free

the only wrong spelling i see is Dosn't instead of doesn't??

or are u just bored?

by oh smeg

About what you are trying to do here would be far more helpful honestly.

Col

by older mycroft

Although, given your lack of spelling ability, I seriously doubt it.

by oh smeg

If you want to use the TV to display the screen of a computer all you need do is connect the SVideo or something similar on the Video Card to the SVideo Input on the Satellite Box or TV.

You can't use the internal Network to transmit to the Satellite Box and even then you need to Bridge the Wired and Wireless LAN's together in the WiFi Access Point as the 2 LAN's will be separated and not able to talk to each other. To do this you need to enter the WiFi Access Points Setup Procedure and Bridge the 2 LAN's together.

Col ]:)

by sex_porn_free

1) thanks

2)the comps are 2 far From the TV to connect them throw a wire.

3) if 2 machine are connected to the Internet (not to mention the same network) , they can connect , wireless or wired it doesn't mater.
(unless am missing something here)
Caz u can transmit video throw the Internet to other computers.

am a software programmer , max i will write a program that receives the data from a specified ip and sends it to the TV as video , lot of work but it can be done, i wanna see if i can see the satellite box from the comp so i can try hacking it from the net instead of hocking it up with a comp and trying to write a program for it

by oh smeg

You can not see the Wireless Computers from the Wired Computer or in this case the Wireless computers [b]Can Not[/b] see anything else that is connected. So you have to Bridge the Wire & Wireless LAN's.

Secondly you can not connect to the TV Wirelessly to send it anything the Technology doesn't work that way.

Thirdly even if you could manage to get a Video Signal to the TV Via Blue Tooth that is only a Video Signal what do you plan to do to the Audio here?

You may be a Programmer and maybe even the best in the world but how do you propose to get Video over Wireless? You can get a Data Stream without problems but that isn't and never will be Video Output from the computer. You would have to somehow transmit the Video Out from the Computer from the Video Out. So you would need some form of Wireless Device being feed the Video that then transmits it. Then receive it somewhere else and decode it then displays it through the TV here.

Yep I know it is possible but I very much doubt that you will be willing to spend the required money to buy the hardware necessary to achieve this.

Col

by sex_porn_free

i want to connect one of my comps to the TV using wireless (cables isn't practical for me)

by sex_porn_free

i was in a hurry to solve it , i didn't even think about the simple solution:
a network scanner

when am home am gonna download one and scan my network XD

sorry for the inconvenience, unless u can find a better way i can connect my Comp to the TV without using wireless

by sex_porn_free

lol
you still didn't show me my spelling mistakes.

what are u talking about?

by older mycroft

"hi
i have a wireless router/modem and 2 comps and 1 satellite TV box [b][u]witch[WHICH][/b][/u] is connected to the Internet [b][u]throw[THROUGH][/b][/u] the router [b][u]throw[THROUGH][/b][/u] a cable.

i have connected the comps [b][u]throw[THROUGH][/b][/u] the wireless network but couldn't connect the satellite box so i had to connect it [b][u]throw[THROUGH][/b][/u] wires , so my router is near my satellite box and TV , i wanna try to see if i can hook the TV to the comp [b][u]throw[THROUGH][/b][/u] the satellite box.

my problem is that i can't find the ip address of the satellite box, so i can start checking if it's even possible(i know some network security )

my router/modem is an ASUS one and it [b][u]dosn't[DOESN'T][/b][/u] have what ips are [b][u]connect[CONNECTED][/b][/u] to it , is there a network tool that can detect the Ip Address connected to my network.

thanks"

[i]Can you SEE the mistakes now? That's the ones I haven't shown you before - I assumed you'd be able to 'see' them yourself![/u]

by sex_porn_free

so your problem with my spelling is that i use throw instead of THROUGH ??

witch[WHICH] and connect[CONNECTED] your absolutely right , i don't know how i missed them XD.

but not everyone is a native English speaker and u did understand what i was saying?? didn't you ;)

by sex_porn_free

maybe your getting me wrong or am getting u wrong:

1)if your connected throw wireless connection u can't see computers that are connected throw wires ????

YES U CAN , TCP/IP doesn't Care what type of connection u have.

2) u can't send video/audio throw the net???

YES U CAN .
data IS data , video , audio , text , gibberish , noise , it's all data

have u heard of YouTube??
it's on line movies ( video/audio )

and some guy just posted a device that dos what i want :
http://www.tigerdirect.com/applications/SearchTools/item-details.asp?EdpNo=152088&CatId=1430SRCCODE=LINKSHARE&cm_mmc_o=-ddCjC1bELltzywCjC-d2CjCdwwp&AffiliateID=TnL5HPStwNw-YSXZjrzVAXdm0kM02ydxig

by sex_porn_free

the problem is not the price it's that it's not compatible with WiFi Network (802.11b/g) witch i use XD

by older mycroft

Whichever route you go down, there are some things to watch out for. Standard 802.11g wireless networks only have the bandwidth for audio, datastream, photo and low-to-medium definition video. Standard broadcast quality and HD video requires a lot more bandwidth, and should be run over a faster 802.11n network.

However, while it's easy to upgrade a PC with an 802.11n network adaptor, you can't do the same with a media streamer.

If your wireless capability isn't fast enough, you'll need to use a wired Ethernet connection. Standard 10/100Mbit/s Ethernet, which is built into most wireless routers and media streamers is quite fast enough.

But ONLY when your connection is wired at both ends!

by sex_porn_free

your saying i can't send the video screen , throw the software , i need hardware to get the s-video ..

well i can (it won't be as good quality)

there are software's that do screen capture , that's what i can do , send the screen capture to the box , that solves the video and am sure i can find a way to communicate with my sound driver and get the audio also

u got to remember , this is my comp, am not looking to make a product to sell , so i only need it to work on my comp.

sorry it took me so long to understand u ;)

thanks again

by oh smeg

Not a Delayed Screen on the TV.

I'm also assuming here that you are saying that the Wired & Wireless LAN's can communicate and share things so the WiFi Access Point has already been set to Bridge the two LAN's. This is not the default setup of these devices.

Run your Screen Capture App and divert the output to the IP Address or whatever it is on the Satellite Box's Input. Depending on how the Satellite Box is configured here it may just require a straight Video Feed or you may need to convert the Video Feed somehow to suit the Box.

Look in Wireshark for the Address of the Box.

http://www.wireshark.org/download.html

Of course if the WiFi Access Point has not been bridged whatever you install WireShark on will be the only part of the LAN Visible. :)

Col

by sex_porn_free

thanks

but i still think i misunderstood u:

your saying that if i hook a wireless router with a computer through a cable , i won't be able to connect to this comp from any comp connected to the same router through wireless network card unless i configure the router??

am a programmer so my technical hardware skills r limited but before i got married i Had a wireless router and it was connect to a comp through a cable and connected to a 3 comps through wireless network card and when i needed to format one wireless comp i used the cable comp as a backup hard-drive through the network and i didn't have to do anything (Caz i have already set them up in the same network (domain) (didn't need to log in to the router to set the network))

by sex_porn_free

if what your saying is true , u just destroyed my dream

am a software developer so i have no idea what 802.11n is XD ( my tech knowledge is limited)

i didn't even know they developed a better WiFi than 802.11g

thanks :(

by oh smeg

Been set to Bridge the WiFi & Wired LAN's together. The default Setting of this type of device is to Isolate both and if you want to use both to lets say share a Printer you need to enter the Routers Setup and Bridge the 2 LAN's together.

It's nothing more complicated than entering the HTTP Address of the Router and the User Name & Password then entering the setup procedure.

Of course while you are at things you should change the Default Password which is generally Password to something else so someone outside your WiFi LAN can not change the Routers Settings. If possible you should also change the User Name as well. :)

Col

This discussion is closed to new replies.