Question Locked

HAL.DLL message

0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I had posted this question yesterday, but it appears that it did not go through or somehow got erased. Anyways, this is the problem:

I have this message

"Windows could not start because the following file is missing or corrupt \system32\hal.dll. Please reinstall a copy of the above file."

The message appears before the Windows GUI begins to load.

The machine is Win XP Pro w/SP2

Any help is greatly appreciated.

7 replies

by dan.cox

At this point your best option is to reinstall windows.
Sorry.
You can try replacing the HAL.DLL file in the C:\Windows\System32 directory with the ones from the Windows install CD. But based on past experience that never works.

by wesley.chin

First, thanks for replying.

I am unable to boot into safe mode, or Windows. Can you suggest a way to get an uncorrupted DLL file into the correct directory?

Thanks

by dan.cox

Do you know what windows PE is?
If so boot into PE and replace it that way.
Google BartPE for good info on that.
If not, do you have another computer? If so you can hook the drive up as a secondary drive and replace it that way.
Or on the other computer go to http://www.bootdisk.com/ and download a boot disk that can access the drive.

by wesley.chin

It looks like #1,2,3,4,5,6 did not work for this particular machine.

Now on #7

by chris910

Start the machine in Safe Mode (Press F8 just after BIOS)

From the command line run chkdsk /f

(it will take a while to complete)

after Check disk finishes see if the machine will start.

This discussion is closed to new replies.