Question Locked

Hard dive boot up issue

0 helpful
3 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Dell D600 and ST980825A HDD (80GB)

When I try to boot up with this drive I get a bluescreen with info that passes so quickly I can't catch it. There appears to be some sort of hardware issue.

The drive works in my portable usb case and I can access files on it so I know the drive is ok.

What do I need to do to get this drive to be recognized as the primary drive by my Dell D600?

3 replies

by rob miners

My Computer, Properties, Advanced, Startup and Recovery and untick Automatically restart. While you are there make sure that Small memory dump (64 KB) is selected and the output is %SystemRoot%\Minidump. The Blue Screen will dump the Minidump file.

Restart the PC normally as this will allow the PC to Blue Screen. Take note of Stop 0X000000 error message and Google it.

Minidump Files can be found here. C:\WINDOWS\Minidump\Mini******-**.dmp

How to read the small memory dump files that Windows creates for debugging

http://support.microsoft.com/kb/315263

To download and install the Windows debugging tools, visit the following Microsoft Web site:

http://www.microsoft.com/whdc/devtools/debugging/default.mspx

Instructions on using Windbg.

Open Windbg and select file, Symbol file path and brows to the Symbol folder that you have downloaded and installed Symbols to, select OK.

Close the workpage and save the Workspace information. This should lock in the Symbol path.

Open Windbg and select file and select Open Crash Dump then navigate to the minidump, highlight it and select Open.

There are two ways to use !analyze -v the easiest is to click on !analyze -v under Bugcheck Analysis.

When you have ran the initial dump if you look to the bottom of the screen you will see kd> to the right of that type in !analyze -v and press the Enter key.

Ctrl + a will let you copy the information and paste it into notepad.

Look to the bottom of the page for information like this. This was fixed by updating the Graphics Drivers.

FAULTING_THREAD: 864f6a98

DEFAULT_BUCKET_ID: GRAPHICS_DRIVER_FAULT

CUSTOMER_CRASH_COUNT: 1

BUGCHECK_STR: 0xEA

PROCESS_NAME: logon.scr

LAST_CONTROL_TRANSFER: from 00000000 to bfef0fea

STACK_TEXT: f6434e6c 00000000 00000000 00000000 00000000 sgiul50!DrvBitBlt+0x585

STACK_COMMAND: .thread 0xffffffff864f6a98 ; kb

FOLLOWUP_IP: sgiul50!DrvBitBlt+585 bfef0fea 75f9 jne sgiul50!DrvBitBlt+0x580 (bfef0fe5)

SYMBOL_STACK_INDEX: 0

SYMBOL_NAME: sgiul50!DrvBitBlt+585

FOLLOWUP_NAME: MachineOwner

MODULE_NAME: sgiul50

IMAGE_NAME: sgiul50.dll

DEBUG_FLR_IMAGE_TIMESTAMP: 3b7dfec7

FAILURE_BUCKET_ID: 0xEA_IMAGE_sgiul50.dll_DATE_2001_08_18

BUCKET_ID: 0xEA_IMAGE_sgiul50.dll_DATE_2001_08_18

Keep us informed as to your progress if you require further assistance.

If you think that any of the posts that have been made by all TR Members, have solved or contributed to solving the problem, please Mark them as Helpful so that others may benefit from the outcome. ;) :D

This discussion is closed to new replies.