If you have deleted the Primary Partition and wish to create more later try this by pressing Enter after each command. Adjust size=20000 to the required size. 20000=20GB 30000=30GB etc.....
Boot from your XP CD and press the first R to enter the Recovery Console.
using DiskPart. For example, from a command prompt, type:
diskpart
select disk 0
clean
create partition primary size=20000
select partition 1
active
Now type
EXIT to exit the diskpart session
If you have only turned off Activation for the Primary Partition try this.
Boot from your XP CD and press the first R to enter the Recovery Console.
At the recovery command prompt type in these commands pressing the Enter key after each one.
diskpart
select disk 0
select partition 1
active
Now type
EXIT to exit the diskpart session