6 replies
by mrsamayrant Accepted solution
by willcomp Accepted solution
by oh smeg Accepted solution
Was the drive running at the time?
That is the important things here HDD not running can survive large shock loads without problems but a running HDD will drag it's heads across the platters and destroy the platters & heads with a very light shock and a 18 inch drop onto cushioned surfaces is more than enough to destroy a HDD.
However if that was the case the HDD would be recognized by the computer when you fitted it and it would have booted normally unless there is a problem with the Power Supply and there simply isn't enough power coming out of the PS to support another HDD in the system. Provided that isn't the case here it sounds as if the drive has been incorrectly fitted.
So what is the Make & Model of HDD that you have here and the same for the computer? If we know that we are in a better position to offer advice.
Col
by mrsamayrant Accepted solution
by oh smeg Accepted solution
Get your DATA Off the drive [b]ASAP.[/b]
Your not going to get a second chance. :)
Previously I've used pellets of Dry Ice to freeze a HDD while I was reading from it to keep it alive till I had got the Data off it.
Worked perfectly when I shut down the system but failed to work ever again latter after the dry ice had evaporated off.
Col
by mrsamayrant Accepted solution
This discussion is closed to new replies.
Trending Hardware posts
Sort by Trending