I agree it's most likely a flat BIOS Battery buy there are a couple of things that you need to do before changing the battery.
The first is to remove the mains lead and allow the system to power down so that if you accidentally drop the battery onto the M'Board it will not cause any damage.
You need the M'Board laying flat when you change the battery so if it is upright lay the case down so you can find the battery if it droops and make sure that you can easily reach the Battery Holder and know how to release the battery. [b]You Do Not Need To Apply Any Force[/b] to release the battery if you think that you need to have a look at the M'Board/System manual to see how you should remove the battery, generally it's just pushing a clip back and the thing will pop up and most times out of the holder onto the M'Board.
When you fit the new battery replace it the opposite way that the old one came out push it in under the catches on one side and then just let it drop in and lock in place and pay attention to the polarity of the battery generally the Positive side is outermost generally but pay attention.
Personally I'm fed up with having to replace M'Boards because someone destroyed one because they didn't know how to change a flat battery safely.
Col