Question Locked

hard drive password

0 helpful
3 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I have a 120gb harddrive from Ibm, but laptop not there i have only hdd drive. i have some data, if i want to use, it detects in bois, but not in my computer, it doesnt show in mycomputer, manage, disk management

Please any suggest will be helpful

3 replies

by wizard-09

Is not the issue here, the laptop is not picking up the HHD, are you using a USB cable to connect it to the laptop?

If so make sure that the USB cable is working, also do you have USB enabled in the BIOS?

What happens when you plug the HHD into the laptop after the machine has booted up?

Keep us informed as to your progress if you require further assistance.

If you think that any of the posts that have been made by all TR Members, have solved or contributed to solving the problem, please Mark them as Helpful so that others may benefit from the outcome.

by oh smeg

The Drive is not correctly connected to the computer. I*f this is a IDE Drive make sure that the Jumper is set to Master if there is one on the Drive. If there is no Jumper on the Drive fit one and make sure that it is Set to Master.

If it is already set to Master remove the Jumper completely from the HDD and try plugging it in again to see what happens.

If however you mean that you can see a Blank Empty Disc in Disc Management this is what should be happening. If you want to recover any Data off it you need to fit it to a Identical Model IBM NB as the Security Chip is part of the M'Board and this Integrated Circuit simply [b]Is Not[/b] available on different Hardware so it is impossible to read this HDD if it is no longer fitted to a IBM NB.

The problem here is not the Password that was used previously but the Encryption Method that was used to encrypt the HDD. Even with the Password/Key there is no way to apply the encryption technology without the Original Model NB.

However once you get your Data off it you can fit it to a USB Enclosure and format it so that it can be used to Backup your Data.

Col

This discussion is closed to new replies.