Question Locked

hardisk enclosure problem(drive not appearing in My Computer)

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

hello, my hardisk does not show up when i connect it to my notebook through the enclosure. the disk is a 2.5" SATA drive from my other notebook. i then tried connecting another SATA hardisk, but the result was the same.

in both instances, the disks did not appear under "My Computer". however, they showed up under Disk Management, but as "unreadable". right clicking on the disk in Disk Management gives only two options "properties" and "help".

i then found an old IDE hardisk and connected to the same enclosure(it supports IDE and SATA). this time it worked perfectly, the drive appeared under My Computer and all the files could be accessed.

other details: OS is vista home premium, but i tried the same setup on another notebook running windows XP, to no avail.
enclosure came with external power adapter which i used, so there is definitely sufficient power for the hardisks.
also, the enclosure connects to computer by USB.

what should i do? please help! thanks!

5 replies

by p.j.hutchison

For the disk to appear the drive must have a valid and working partition setup on it.
Has this disk any files on it before putting it into the enclosure? If not, you need to set up a partition and format it to become visible, you may also need SATA drivers installed to view the disk.

See http://support.microsoft.com/kb/309000/en-us

by juzamdjinn6

hi, thanks for helping! the disk is not a new one and it has files on it, so that shouldn't be the problem.

one of the SATA drives with the problem is a seagate, i have visited their site but was unable to find any drivers. the other was an internal hardisk that came with my notebook, i do not have the drivers for it as well. do you have any idea where i could download these? thanks!

by siungfr

hardisk enclosure problem(drive not appearing in My Computer)
hello, my hardisk does not show up when i connect it to my notebook through the enclosure. the disk is a 2.5" SATA drive from my other notebook. i then tried connecting another SATA hardisk, but the result was the same.

in both instances, the disks did not appear under "My Computer". however, they showed up under Disk Management, but as "unreadable". right clicking on the disk in Disk Management gives only two options "properties" and "help".

i then found an old IDE hardisk and connected to the same enclosure(it supports IDE and SATA). this time it worked perfectly, the drive appeared under My Computer and all the files could be accessed.

other details: OS is vista home premium, but i tried the same setup on another notebook running windows XP, to no avail.
enclosure came with external power adapter which i used, so there is definitely sufficient power for the hardisks.
also, the enclosure connects to computer by USB.

what should i do? please help! thanks!

by oh smeg

You can get the Makers Testing Utility here

http://tinyurl.com/3t8o3

Just click on the Drive Makers name and you will be prompted to download the Testing Utility.

Also does this enclosure have a Jumper to set it to IDE or SATA? If it does you'll need to set it to SATA not IDE.

Seagate has Seatools to test their HDD with and it's available here

http://tinyurl.com/ydywy4

A for drivers provided that the USB Ports are working her they shouldn't be needed. Of course if the USB Ports are not working you'll need to install the USB Drivers.

Col

This discussion is closed to new replies.