Question Locked

Hardware Not Showing

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
Running XP Pro. Have just installed a USB IDE/SATA cable. Attached a hard Drive. It appears in Device Manager, but not in My Computer why so?

5 replies

by rob miners

Try rebooting the computer without any USB devices attached. Then plug in the USB drive, right click on My Computer, select manage, and then click ?Disk Management.? If the drive is not present in the Disk Management window or if you are not able to access it, then the drive may have failed. In this window you should see all of your connected physical drives, their format, if they are healthy, and the drive letter.

Change the drive letter of the drive. Right-click on the drive in the list, and from the resulting menu select "Change Drive Letters and Paths"

Click on Change so you can change the drive letter. Click Change. Select a new drive letter from the drop down list, preferably the one that is not normally used for this drive.

Click Yes on the confirmation screen and you are done.

Keep us informed as to your progress if you require further assistance. ;) :D

by rob miners

Write down all fixed Disk and CD/DVD drive letters so as not to delete them. DO NOT delete any of the fixed hard disk drives or CD/DVD optical drives registry values.

1. Login with Administrative privileges.

2. Disconnect all USB or FireWire storage devices.

3. Open Registry Editor by typing regedt32 in the Run box and navigate to the following registry key: HKEY_LOCAL_MACHINE\SYSTEM\MountedDevices. Right click on MountedDevices and select Export. Save this file as you may need it in case something goes wrong. Save it as Devices.reg, it should default to My Documents.

4. Under HKEY_LOCAL_MACHINE\SYSTEM\MountedDevices there will be registry keys with the name that resembles the format of \DosDevice\X: where X can be any alphabet letter which corresponding to your physical system drive letter.

5. Delete all possible USB drives, FireWire drives and external drives which have a drive letter.

DO NOT delete any of the fixed Hard Disk Drives or CD/DVD optical drives registry values.

Exclude \DosDevice\A: which normally reserved for floppy disk drives.

Keep us informed as to your progress if you require further assistance. ;) :D

by sgt_shultz

take a peek at it in Disk Administrator (right-click My computer, pick Manage)
find the drive then right-click it and do whatever is offered there, probably initialize then format. I can't remember the exact term, initialize might not be right...

by rob miners

The Initialize and Convert Disk wizard should appear. Choose New Partition, then choose the Partition type and follow the prompts to format the drive. Use the NTFS file system rather than FAT32.

This discussion is closed to new replies.