7 replies
by cmiller5400
by cg it
by w2ktechman
I am in agreement with both responders. HW raid is much more stable than SW raid, and is much faster and uses less system resources.
SW raid can fail in most of the same places as HW RAID, plus a slew of other places. This can decrease the reliability. If cost is an issue, then a SW RAID solution may fit the bill, but be warned that the server will run slower, and you may generate errors more often.
by brossyg9
I have a Dell Precision 390 with a 975X Express chipset. The chipset has Intel's Matrix Storage Technology (RAID). I want to implement a simple 2 drive mirroring RAID 1 arrangement where I leave the boot drive (C) the way it is (non-RAID) and use the D drive together with a new drive to form a RAID 1 arrangement.
I assume that the 975X is essentially a hardware-assisted software RAID solution, but I cannot find any difinitive information on this. I will either use this RAID on the motherboard, or will buy a separate RAID controller (Adaptec 1220 SA ?), but I am trying to figure out what the hit to performance will be for either of these solutions. Are they both hardware-assisted software RAID? Will one perform better than the other? Will I notice a performance decrease with the motherboard RAID solution?
The only thing that the RAID 1 drives will be used for is a MS Access database (250 meg) that is read/write intensive).
Can anyone adivse?
by marcosbone
by marcosbone
by ncherian
Just another question to add onto the original...
What about for RAID 0? There are not many calculations involved there right?
I am really considering it from a cost perspective (not security of data/failsafes).
What can Hardware RAID add to make it so much better than Software RAID for RAID 0?
This discussion is closed to new replies.
Trending Windows Forum posts
Sort by Trending