Question Locked

HDD showing incorrect size

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

the problem i'm having is this ,i was having a clicking sound on hdd so i used spinrite to do the repairs,after this is dome i'm getting a blue screen that flashes in split seconds,so i try to use my xp cd to do the repairs,while doing the repairs i realised that the size is much smaller than it should be(its a 80g sansung)its showinjg 31g.

what software can i use to recover my hdd space.

thanx for any help that you can give.

5 replies

by slayer_

It's done for, I am amazed it reads at all, if its not that old, try to get warranty, otherwise, you need to replace it.

You might be lucky to get your files off the disk but it sounds like it is too far gone.

Try maybe a Nix LiveCD or something to see if it will let you backup your files.

by geebar

i have recovered all my files,and even format and reinstalled xp on the 31g,but i just cant get back the drive to the original size

by oh smeg

With the Makers Testing Utility. If it tests OF then you are fine to continue using it but if it fails the test you should pull it out and test on another computer.

If it still fails the second test in a different computer the Drive [b]HAS[/b] to be replaced but if it passes the second test the M'Board, Data Lead or Power Supply in the first computer is damaged and needs replacing. Look here for a full list of the HDD Makers Testing Utilities

http://www.tacktech.com/display.cfm?ttid=287

Next thing to do is open the BIOS of your computer and see if the HDD is correctly reported there. If it's not the HDD needs replacing if it hasn't been removed and a jumper altered. If it has been removed it is possible that the drive was jumpered to set it to a 32 GIG Capacity and if that is the case you need to backup all your Data & Settings and then correct the HDD Jumper then reformat and reload the system.

If BIOS is showing the correct Size open Drive Management in Windows and look to see what this drive is being reported as. It is possible to format the remaining section of the HDD here to regain full capacity over 2 or more Partitions.

IF you require just 1 Partition on this HDD you need to use a Utility like GParted which you boot from the CD that you burn and resize the drive from there by expanding the existing partition to make use of unallocated space. However if there is another Partition on this drive you need to delete it first before you can expand the Boot Partition up.

http://gparted.sourceforge.net/download.php

Col

This discussion is closed to new replies.