Question Locked

Help! Changing Motherboard without having to reinstall XP

0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Hi all,
I dont know if this can be done?
I am going to install a new motherboard and processor into my sons computer and he doesn't want to have to format the drive and reinstall XP because he needs everything on it and there isn't enough room to do a complete backup on a partition. Is there a way to do this? Would it work if after installing the hardware and booting it up with the xp diskand going into the recovery console and doing the fix mbr command.
Regards,
Mick Morris.

7 replies

by rob miners

be done but wouldn't recommend it. With a motherboard that is very similar EG : same chipset, same brand. What, no access to a burner?

by thechas

Aside from back up and restore, there are 2 methods that you might need to combine.

The chance of success depends a lot on how similar the 2 motherboards are. Going from AMD to Intel is very difficult. Even different manufactures of chip-sets are problematic.

First, back up ALL critical files and settings. This allows you to recover if something goes wrong.

Download and extract the files for the latest drivers for the new hardware setup. Use an easy to find folder, with a sub-folder for each device.

Next, just before shutting down the old setup for the upgrade, open up device manager.
Remove EVERY device that will be different with the new setup.
You will likely end up removing all devices as plug-in cards will need to be removed in order to remove the motherboard resources.

Shut down and power off the system.

Change the hardware.

Boot up. If all goes well, you can point the new hardware wizard to the extracted driver files.

If you have major problems, the next step is to attempt to perform an "In-Place-Upgrade". This is nothing more than installing XP over itself as an upgrade rather than a new installation.

Keep in mind that with XP as compared to Windows 98 or Me, you do NOT have to format the hard drive to perform a clean installation.

When you install XP on a system that already has XP installed, if you choose the option to install XP in the C:\Windows folder, it will erase all of the system files and start over fresh. All of your files will be intact.

However, any new installation of XP leaves all of your installed programs orphaned. You will need to reinstall them so that XP knows they are there.

Chas

by eneuberger

A full automated prcedure to move winxp from one hardware to another can be found at this link: http://rapidshare.com/files/18172527/WinMBoardMig.zip It works ONLY on WINXP sp2; The soft takes care of things as hal detecting and change; also takes care of adding critical drivers and modify the system registry hive to prepare windows to found all hardware on next boot; you can sysprep prior to run this util; then you can deploy with one image for any motherboard

You should run bartpe or winpe with your old hd (and old os) instaled on the new mobo; then launch the downloaded app from within the pe.

IT WORKS...

by eneuberger

A full automated prcedure to move winxp from one hardware to another can be found at this link: http://rapidshare.com/files/18172527/WinMBoardMig.zip It works ONLY on WINXP sp2; The soft takes care of things as hal detecting and change; also takes care of adding critical drivers and modify the system registry hive to prepare windows to found all hardware on next boot; you can sysprep prior to run this util; then you can deploy with one image for any motherboard

You should run bartpe or winpe with your old hd (and old os) instaled on the new mobo; then launch the downloaded app from within the pe.

IT WORKS...

by mjd420nova

Unless the new motherboard is exactly the same and has the same version of BIOS, it will only give you head aches. Best thing is to boot to the CD and do a repair of the OS, that should get you loaded with a minimum of hassles.

by jhba20983

boot up your pc with windows disk in cd drive. install windows, it will search your hard drive for previous installations, click repair it will install the info for your new motherboard & leave all your other files intact

This discussion is closed to new replies.