Question Locked

Help cracking a Flash Drive

0 helpful
9 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Ok, I acquired a flash drive a couple of years ago (it came free with something I ordered for someone else - since they didn't need a flash drive they gave it to me). It's a UT169 with the fingerprint sensor on it. I don't remember what all I did with it back then, but I know I never got it work (never sensed the fingerprint).

Today I came across it and decided to see if I could get it to work. Apparently I had removed the fingerprint verification software. And of course without verifying a fingerprint the Flash drive denies access. So I can't even put the software back on! LOL.

So anyway I did a search and found out that these things are easily bypassed:

[quote]All you need to do is use the PLscsi tool to send a single USB command ? Command Descriptor Block ? to the stick for access to the public partition to be replaced by access to the protected one.[/quote]

What I need is for someone to explain to me exactly what that means. (running Vista)

9 replies

by tink!

Thanks, I had actually already run across this and downloaded the plscsi tool.

But now I don't know what commands to do.

The plscsi help displays this:

>plscsi.exe --help
Modified: Since Saturday. September 21, 2002 began.

Usage: plscsi -$option $name... // $comment...

Options:

-a --align $offset [ $length ] // else 4 KiB
-c --compare
-d --data $length
-f --from $fileName // -f "" is from stdin
-h --help
-i --in $length // else 0
-l --loop
-n --no
-o --out $length // else 0
-p --please // else forbid some things
-q --quiet
-t --to $fileName // -t "" is to stdout
-v --verbose // else --quiet
-w --whichever
-x --x $cdb // else -x 12 0 0 0 24 0
-X --X sense $length // else xE
-X --X time $seconds [ $nano ] // else max
-y --yes

Examples:

plscsi -w // list device names
set PLSCSI=$name // choose a device name
plscsi -- // echo the chosen device name

plscsi -v -x "12 0 0 0 24 0" -i x24 // say Inquiry
plscsi -v -x "00 0 0 0 0 0" // say TestUnitReady
plscsi -v -x "1B 0 0 0 00 0" // say Stop
plscsi -v -x "1B 0 0 0 02 0" // say Stop and Eject

plscsi --loop -v -x "00 FF FF FE" -i x101 -t cycle.bin // write pattern
plscsi --loop -v -x -o x210 -f cycle.bin // read pattern
plscsi --loop -v -x "00" -i 1 -t x00.bin // write byte pattern

by phillipirons

I have a fingerprint scanner on a flashdrive that I bought from a salvage lot. I am wondering how to access it.

by mike0351

Try deleting the partition of the thumb drive and then recreate the partition.
1. Right click on "My Computer" icon on the desktop.
2. Select "Manage".
3. Select "Disk Management"
4. Select your USB drive in the right side box and right click.
5. If "Delete Partition" is grayed out, then try "Format"

Let us know if that works or does not.

Mike

by shasca

This is the safest site I dare to post here. As you know we as acommunity do not ask for,or provide help in the practice of circumventing security.

It's not that we don't want to help. We have just made a pact not to.

woops a "swing, and a miss"

by phillipirons

I tried taking out the hard drive and formatting. I thought it worked but when I reinstalled it in the Wolverine board only the unused section of the hard drive was usable and I was unable to use the finger scanner to protect my information because it was still tied up by the previous information. I have a setup disk from the Wolverine company and even talked with Rico Kirby at Wolverine and since he is not the designer of the software he could not offer me any solution to my problem. It is very annoying if someone has a solution and is not willing to share; what good is a tech site that will not help. The program is called fingerverify by Lightune and I have sent them request but have not received a response. The USB drive is Wolverine 4160 and it belongs to me. Am I being unethical? I am new to this arena but it seems if someone sells their property to someone else it should belong to the person who made the purchase.

by phillipirons

I removed the hard drive then removed the partitions with a freeware partitioning program. I don't recommend freeware partitioning software for anything other than corrupting data. The finger prints are kept on the circutboard however the password bypass seems to have been kept on the hard drive and was damaged when the partition was removed. I then ran the Fingerverify program which invited me to install a password. After reseting the password you can setup new fingerprints. My "data home" has been rekeyed and I am the happy new owner with security. If that goes against the moral grain of the tech gods then byte me! I hope this information is usefull to the people unskilled in the binary world as myself.

This discussion is closed to new replies.