Question Locked

HELP! Sudden problems with wireless connection in home network.

0 helpful
9 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Hi All!

I have an old PII 350 that has been working great as an old standby to surf the web in my rec. room.
It has ALWAYS worked on my Netgear wireless G router and and internal Linksys wirelss card on the PC. It suddenly stopped working the other day and I have tried everything I know to fix it! The Linksys card definitely picks up the signal after I reinstalled and restarted everything. Signal is strong and dependable BUT I can't surf the web with either Firefox or Explorer (can't find any servers message). I have tried resetting the connection type in explorer's internet options. The only thing that seems out of line in the wireless setup summary screen is that the is no gateway listed for the wireless connection on the pII.

9 replies

by nicknielsen

there is most likely no valid IP address, thus no connection.

Check your network settings. Make sure the wireless card is your default network connection. Verify that all clients and protocols are properly installed.

by w2ktechman

unplug your cable/dsl modem, and your router. wait 30 seconds and plug them both back in.

If that does not help, ping 127.0.0.1 and see if you receive a response.

If not, re-install your wireless card (NIC), and/or try a different one.

If it pings fine, try connecting (via LAN cable) directly to your cable/dsl modem. If it does no work, call your ISP.

If it does work, reset it again (along with the router) and try connecing to your router and take a look at the settings. It may have been setup for automatic firmware updates (may have caused a problem), or the router may be failing. If it appears fine, go to your computer and try renewing your IP address

by dc1974golf

Thanks for the tips! I will try them and see what happens!

by rfulgham

Like in the other reply, check your ip settings, either gateway, or No DNS servers are being add with DHCP.

must have a gateway and at least one DNS server.

If this is not coming over through DHCP and you know the network IP address, gateway and DNS try entering manually instead of using DHCP.

With Netgear, also just rebooting the router/firewall has fixed this issue for me.

by dc1974golf

OK... I have tried the suggestions... restarting the router and I have actually physically reinstalled the wireless card to another pci slot. I have manually entered the gateway and DNS into the network settings on PC network setup. Still nothing! I know the router didn't auto install frimware, but there is a newer version on the netgear site. Maybe that will help??? I am truely "dazed and confused"!

by dc1974golf

I tried manually inputting the DNS and gateway but still to no avail! I think a new wireless adapter is the answer???!

by 1bn0

I had a client with a d-link card and router.

Was very intermitent. Would work for a while and then just crap out. Sometimes hours, sometimes days. Everyone including d-link thought it was the router

Finally replaced everything.

I took the old stuff with me and tried it out on my own network. The router works fine. The card was crap.

I was getting EVERYTHING. IP Address,gateway and DNS server information. But the *&%&*ed thing wouldn't carry data worth a damn.

by vrodkaraf

I went through this once, it was the wireless router that had gone bad. I replaced it and all was good. If you have another router, you may want to swap it out just to test it.

This discussion is closed to new replies.