Question Locked

HELP: Unable to connect Network Printer to my work domain laptop

0 helpful
8 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I need some help, been going over this more than 1 week. No-one seems to be able to figure this problem out. Help please....
I am running a home network, I have 3 computers attached: System 1: Home PC OS XP Pro SP2, System 2: Work PC OS VISTA Ultimate, System 3 Laptop 1 OS XP Pro, System 4: My Work computer on a Domain. All my computer can access the Network computers that are physically attached to the Home PC System 1, My Work computer Laptop, is not allowing me to connect to my network to print, It keeps trying to connect me to HomePC.bscc.bls.com which is the prefix for Cingulars domain. I need some help, tech support really was unable to help couldn't figure it out. I really need to be able to print from my work computer on my home network. Please HELP...

8 replies

by w2ktechman

It seems that there is a bit of confusion, so I am going to put what I think you mean, and a possible solution. If I am incorrect, feel free to let me know.

You have 3 systems + work notebook connected to a router or switch. This makes up your home network.

Your printer is attached to PC1 in your definition, or the printer is on the network (not attached to a PC)

all computers can see and use the printer except your work notebook

If this is correct, then go to start -- run -- and type "\\%ip address%" (without quotes, and %ip address is the ip of either the printer or the computer it is attached to).

If it finds the printer shared out on a computer, it will install when you double click on it. If it finds it from the ip address, it should start the installer.

If not, can you, from your work system, see any other computer on your home network?

by usyakuza

Thanks for your help w2techman:

Now to answer your questions. My network is connected to a linksys router. PC1 & PC2 are connected through Ethernet. PC3-Laptop1 is connected wireless, the system with the problem is. PC4-Work Notebook. All systems can access the Internet, I can physically see the systems on the network except the PC4-Work Notebook. I can see the computer name when searching for printers on the network. But when I click the icon it doesn't open. When I type "\\%ip address%" I get the error \\%ip not found. All the systems are on, and still unable to print. Does that help any.

Thanks again.
Jiro

by w2ktechman

Try opening a command prompt and typing IPCONFIG /release
press enter.
type IPCONFIG /RENEW
press ENTER
type IPCONFIG /flushdns
press ENTER

try again
Did these help?
If not, map a drive to the computer that has the printer attached. If the printer is shared then you should be able to access it. If the drive is mapped, then there should be no problems 'finding' it by IP address either.

by ben.rattigan

If I understand this correctly then you need to connect your laptop running Windows XP Pro to your home printer also on your network?

You need to follow the Add Printer Wizard and do either of the following steps depending upon how the printer is connected, a share or physical network device.

If your printer is directly connected to your network with its own ethernet port or wireless connection then do this.

1. Select the Local Printer attached to this computer (this doesn't make sense because your printer won't be but this is how it is done)
2. Make sure Automatically detect is unchecked
3. Click Next then click Create port and change the port type to Standard TCP/IP
4. Click Next and Next again.
5. You will now need the IP address of your printer, enter this and click Next.
6. Select Generic Network card and click Finish.

If you printer is shared from another computer then do this.

1. Select a network printer or a printer attached to another computer
2. Click Next
3. Select the first Connect to this printer field and enter the host name or IP address of the PC it is connected to and the sharename of the printer (i.e. \\homepc\homeprinter).
4. Windows will now attempt to locate the printer share on the PC if it does then you will be prompted "Do you want to use this printer as your default printer?" Click either yes or no then your done.

by usyakuza

Thanks for your help Ben:

I think the only thing that is not done, is that my printer is only connected to the one computer system. I will attempt to physically connect it to the router instead of the computer. The work computer can see the systems on the network, but cannot access them. Does the fact that the Work notebook is on a domain have anything to do with it.

Thanks again for your attempts to help
Jiro

by usyakuza

Thanks a lot gentleman. The ip address with the HP printer did the dead. I needed to reset the HP Network setting on my HP Printer it gave me the new ip from my home network, plugged it in and now all computers can print to my HP.

Thanks for all the help.
J.

by timbuk2

I found this topic by searching Google, as it relates to my situation. I am hardwired through a router & broadband modem for my desktop and connect wirelessly via my laptop. I run into this several times per year, but don't recall how I resolved it. I tried your suggestions above, but didn't work. I deleted the printer configs that I was using successfully, since they no longer worked, now I can't even locate the printer on my other machine, even when typing in the suggested path: \\D56JX711\hppsc900 or trying all other methods available.

After I rebooted my laptop, at least it said it was attempting to retry to connect to the printer, had documents waiting, but couldn't find the printer. Said Spool Services were not running, which they are on both machines. I finally eliminated the firewall on my desktop, as it seemed to often be the culprit. I turned the firewall off on my lap top to make this attempt to connect.

Connection sharing is allowed and the printer works on my desktop. What can I try next, I'm about ready to buy a cable and forget this wireless stuff, of which this is only a partial problem list.

Thanks for any help
Tim

This discussion is closed to new replies.