Question Locked

Help With Exhange Sending Outbound

0 helpful
3 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Exhange does not send any mails out only inbound where is the problem? I can telnet to my ISP smtp server but i dont know if i filled the smtp server on the right place

Please Help

Thanx

3 replies

by churdoo

Are you saying that you have to direct your outbound email through your ISP?

See if you have created any connectors to the * domain (all external domains). If not, create one. In this connector, place the IP of your ISP's SMTP server in the SMARTHOST entry, then restart SMTP.

by glennb7

I ran into a similar issue, which turned out to be a DNS problem. The solution was in the DNS Server IP's programmed into the SMTP Virtual Servers Outbound Advanced Settings. The DNS IP's were old. Once replaced with the ISP's new DNS servers all the queues in Exchange suddenly sent out beautifully. Don't know if this will help but take a look.

Good Luck.

This discussion is closed to new replies.