13 replies
by apolon_3 Accepted solution
by hal 9000 Accepted solution
You can use both of these applications to check how clean your system is Ad Aware Se available here
Or Spy Bot S & D available here
Personally I would be using both as there is no one program that is capable of cleaning every piece of Spy Ware that you can pick up though to be fair Spy Bot S & D can pick up some of the programs that you are using like Windows Defender, On Line Banking and things like that so you need to use this one with caution and untick any of your actual applications that it picks up before cleaning the system or you will cripple the applications and they will no longer work.
What you need to do is download both of these applications from their Home Web Pages and then install them reboot if asked to and then load any updates available just like you would a AV product. When you have the Application fully up to date you reboot the computer and if you are running XP. Y2K you press the F8 key and select [b]Safe Mode[/b] and scan the system in [b]Safe Mode[/b] removing any infections that you find. After you have run the application once and cleaned the system rerun it to see if there is anything else that was hiding or wasn't picked up in the initial scan and remove that as well keep running the scan till the system comes up as clean or just with your applications that you need.
Then reboot the system allow it to start normally and see if you have cured the problem.
[b]Safe Mode is only for doing work on the OS and doesn't mean that it's safe to go on line or onto a LAN as there are a minimum set of drivers loaded and most of the start up applications are not running so it's very easy to pickup an infection so you should only run the system in Safe Mode to do repair work on the OS[/b]
Col
by apolon_3 Accepted solution
by hal 9000 Accepted solution
If only to be sure that you actually remove any nasties that you have picked up along the way.
Personally I wouldn't be worried about a 500 MEG Page File as that's about normal for an XP machine this one on a fairly fresh reboot is currently running at 517 MEG of Page File Usage but gets up to 1.4 GIG when it's been running for quite some time.
I would be worried about the High CPU usage however unless you have the Page File on a 500 Meg Limited Size partition in which case the CPU will then start to be used harder and slow the system down dramatically.
Col
by jamesatmaisonverre Accepted solution
by apolon_3 Accepted solution
by sbx14 Accepted solution
First of all, the way you partition your hard drive is way off. Personally, I don't believe any single HD should have more than 2 partitions: one for system and one for data.
YOur system partition won't have much left after it's divided by 6.
Now increase the paging file allocation for performance. Right click on My Computer and hit Properties. Then select Advanced tab and click on Settings button in Performance section. Choose Advanced tab. Go to the Virtual Memory section and select the system drive letter. Then change the allocation size to 1024 for both initial and maximum.
You can fine tune the setting for best performance.
by apolon_3 Accepted solution
by charliespencer Accepted solution
Most of the time Windows is happy with the min and max set to the same figure. That way Windows can allocate a fixed block of drive space for swapping instead of constantly resizing the swap file.
Also, you mentioned explorer.exe it taking up a lot of resources even though you are only looking at one or two web pages. You've confused explorer.exe for iexplore.exe. iexplore.exe is Internet Explorer, what you're using to look at the web. Explorer.exe is the file manager / desktop manager / GUI / bunch of other things that shouldn't be managed by one program but are anyway. The number of web pages you're viewing has nothing to do with explorer.exe.
by apolon_3 Accepted solution
by michael jay Accepted solution
by apolon_3 Accepted solution
by cristosl Accepted solution
This discussion is closed to new replies.
Trending Hardware posts
Sort by Trending