Discussion Locked

High res and windows freezes/hangs

0 helpful
15 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Hardware specs: Abit SA6R MB(latest BIOS), 30GB HD, PIII 1Ghz 133 CPU, 1 stick 256MB RAM, VisionTek Nvidia GeForce2 Video Adapter (PCI), Soudblaster Live PCI Card, CD-ROM Drive, CD-RW Drive, SMC NIC.
History: Performed a clean install of WIN2K andWINXP (dual boot). Installed latest drives for all hardware. Installed latest IE and WIN2K and XP SP's and critical patches. Prior to clean reinstall everything worked fine. Same hardware. Installed McaFee Antivirus, and Winzip only.

Issue: Windows hangs (need to reset) everytime intermittently either when playing movie or surfing. Happens everytime I go to www.shockwave.com (shockwave running on webpage). Also happens everytime I run the WIN XP tour. If I set my resolution to 600 x 800 256 colors it does NOT hang. Anything higher it does hang.

Steps I've taken:
1) disconnected all hardware except video card, etc. still happens
2) Used a different video card - same thing.
3) Tested sytem RAM using simmtester
4) Clean installed just WIN2K - same thing.

15 replies

by paul7410

By the way, I upgraded the BIOS before clean installing - everything went fine and I did reset the CMOS. Don't think this has anything to do with it, thought I'd add it... oh yeah and thanks for your help. : )

by dmiles

Check the video cards manufacturers web site to check for compatibility,make sure that card is set to SVGA,then check to make sure you have the correct OS drivers
Boot computer into Safe Mode and check the Device Manager see if their are duplications of the video card

Go to Microsoft web site and download the latest Direct X updates,this should apply to Active X also.
Hope this Helps

by paul7410

SoulRider. Thanks for the help. Card is compatible, has 2K drivers installed, set to SVGA.

Downloaded latest Direct X - installed. Installed MDAC 2.6SP2 for Active X control.

Safe mode - no duplicates.

by dmiles

So,this seems to be a software bug,go to web site to check for bug fixes or reload the application

by paul7410

Another note. I'm leading towards an IRQ conflict - which aren't supposed to happen as much in 2K or XP. It hangs if I watch a mpg in media player if any higher then 640 x 480 | 256 Color. If I watch it streaming from the internet - it hangs after about 5 seconds. If I download the movie and watch it - about 20 seconds. If I download and watch movie and move USB mouse on screen while watching 10 seconds. Sound card, video card, and Ethernet all use IRQ 11 in 2000.

by cactus pete

Does your motherboard support monitoring the heat on the proc?

I experienced this on one machine, a reseating the processor actually fixed the issue. Good luck.

by shakeelr7

Hi Friend,

So, your problem is very critical. You have done all the things but the problem is still there.

My friend i think that the solution of your problem is in your question. i am coding your words.

YOUR WORDS:-
"hangs when playing movie or surfing to www.shockwave.com and run the WIN XP tour"

These seem that you are having problem with your display card but you changed ur display card but nothing happens.

YOUR WORDS:-
"4) Clean installed just WIN2K - same thing."

If you are using windows 2000 server then it is a big mistake but i can guess that you are using windows 2000 professional.

My friend, too many PACHES and prior relase of Service Pack also make lots of problem. So try to use the most authenticated SERVICE PACKS and PACHES.

Last you also upgraded ur BIOS so this could be a problem or as you said while using internet my PC freezes so replace your MODEM and do that same things or make a clean windows XP Pro installation after this just run movie without Display Drivers installaion and with installation of Display driver then see what happen after that try to find the problem while connecting with the internet and beside of all this try to do run your CPU with some other Monitor.

I think these complicated suggestion of mine could help, if these work then i feel very great.

Best of Luck
Shakeel.

by paul7410

As suspected it ended up being a bad Mother Board - replaced and running fine : ) thanks for your help.

by larryny1

I would check the Video Adaptor web site for known issues with the other hardware in you system.
I have found out that W2K may cause video memory errors when using an AMD Athlon Processor. The fix is to limit how W2K uses video memory (regedit)
I'm not saying this is you problem, but it may be worth looking at how all you hardware works together.

Good Luck

This discussion is closed to new replies.