Question Locked

home computer plugged into router, laptop cannot find wireless connection

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

A couple of weeks ago I bought a new laptop with wireless connection. I already have a home computer connected to a wireless ADSL router. Connecting to the internet using this router on my dad?s laptop is fine but on my laptop it seems impossible.
I have already tried:
? Setting my internet protocol to 'obtain addresses automatically.'
? Setting up a new wireless network connection on my laptop.
? Repairing the wireless network connection on my laptop.
? Disabling and re-enabling the wireless network connection on my laptop/computer.

Does anybody have any solutions?
I want to be able to connect to a wireless connection supplied by my home computers wireless ADSL router on my laptop with 'built in wireless connection'.

(both computers use windows XP)

5 replies

by oh smeg

If it is a WiFi device and properly configured it should prevent any unauthorised WiFi connections. What you need to do if that is the case is to open the routers Setup procedure and reconfigure it to accept more that the current limit of connections and then enable the same filtering protocols that are currently in use.

At the same time it may be a good idea to update the firmware in the router as well so that Security is maintained.

Col

by oh smeg

To got the the Routers Setup you enter a Web Address in a Browser and then the Routers User Name & Password. Once this is done you are in the Routers Setup Procedure where configuration can be changed.

You will most likely be looking at WEP Addressing as the issue here but really it could be any Addressing that is used depending on how the Router was configured. Also you need to remember that Routers need to have their Firmware regularly updated to be effective as a Security Measure so it's importantly to regularly upgrade the Routers Firmware which you get from the Routers Maker.

Col

This discussion is closed to new replies.